Do you frame basement developments in Edgemont?

Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Breckenridge Greens, Glastonbury, Granville and West Henday.

Can you take out this wall?

Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.

Can the same crew do the drywall after framing in Edgemont?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Can you add backing for a TV mount and shelves?

Yes, and tell us before the wall closes. Adding backing while it is open takes minutes; finding it missing afterwards means opening the wall or relying on anchors that eventually pull out. We ask what is going on the walls first.

Can the same crew do the drywall after framing in Edgemont?

Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.

Do you build bulkheads around ducting in Edgemont?

Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Framing Edgemont Edmonton | Stud Walls

Framing in Edgemont, set out for the board that follows

Interior partition walls framed square and plumb
Stud spacing matched to the drywall going over it
Door rough openings framed to spec
Wood-frame basement development layouts in Edgemont
Edgemont coverage — we come to you
Wood-frame basement development layouts in Breckenridge Greens, Glastonbury, Granville
Bulkheads and soffits for ductwork and lighting

Backing for everything that gets fixed later

Decide before it closes

Grab bars, TV mounts, floating shelves, cabinets, handrails and towel rails all need something solid behind the board.

The cheap moment

Adding backing while the Edgemont wall is open takes minutes. Finding it missing after the wall is finished means opening it or relying on hollow-wall anchors that eventually pull out. We ask what is going on the walls before we close them.

Bulkheads, and why they are never straight by accident

Boxing what has to stay

Edgemont basements are full of ducts, beams and plumbing that cannot move. Bulkheads box them, and each one adds corners.

Getting them right

A bulkhead framed slightly out of square is obvious once it is boarded, because the eye follows its long lines. They take longer than their size suggests and they are worth the extra care.

Leaving room for mechanical and electrical

Framing comes first, services follow

An Edgemont frame that leaves nowhere for a duct or a drain forces the mechanical trades to notch and drill in ways that weaken it.

Coordination

We would rather walk the layout with the other trades before framing than have them cut through a stud we set. It is a short conversation that avoids a structural argument later.

Basement framing against foundation walls in Edmonton

Hold it off the concrete

Framing tight against an Edgemont foundation wall puts wood and insulation against a cold, sometimes damp surface with no way to dry.

How it is done

The wall is held off, or a rigid layer goes on the concrete first. It costs an inch or two of floor space and it is the difference between a basement that stays dry and one that smells musty in year two.

What affects the cost of framing in Edgemont in Edmonton?

Wall length, layout and openings

Framing cost in Edgemont tracks the total wall length, the complexity of the layout, and the number of openings and bulkheads. We price off a site walk-through and give a fixed number before we start.

Typical framing work in Edgemont homes

Because Edgemont is a West Henday community with a mix of older homes and newer builds, framing calls here range from clean basement layouts in the newer homes to alteration work in the older ones.

Why Edgemont homeowners trust Emplastrum for framing in Edmonton

Framed by the people who finish it

As a drywall and finishing company first, we frame walls the way we want to board and tape them — square, plumb and consistent — because no amount of mud hides a crooked frame in Edgemont.

Fixed price, same-day reply

We cover Edgemont, Breckenridge Greens, Glastonbury, Granville and West Henday, 7 days a week. Free on-site quotes and fixed prices, and we stand behind the work.

How it works

Simple, clean, on schedule — Framing in Edgemont Edmonton

Free quote

We come out to your Edgemont Edmonton property, take a real look at the framing, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every framing quote in Edgemont Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the framing in Edgemont Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Edgemont Edmonton home while we finish the framing to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished framing with us and you're happy with the result in Edgemont Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the framing contractor Edgemont Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your framing project in Edgemont Edmonton.

Read our reviews on Google

FAQ — Framing Edgemont Edmonton

Framing Edgemont Edmonton: your questions answered

Do you frame basement developments in Edgemont?: Yes — wood-frame basement layouts ready for drywall are our most common framing job. We also cover Breckenridge Greens, Glastonbury, Granville and West Henday.
Can you take out this wall?: Only once we know it is not load-bearing, and that needs drawings or an engineer rather than an assumption. If it is bearing, the job becomes beams and posts — far better priced before demolition than discovered during it.
Can the same crew do the drywall after framing in Edgemont in Edmonton?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Can you add backing for a TV mount and shelves?: Yes, and tell us before the wall closes. Adding backing while it is open takes minutes; finding it missing afterwards means opening the wall or relying on anchors that eventually pull out. We ask what is going on the walls first.
Can the same crew do the drywall after framing in Edgemont in Edmonton?: Yes — one crew frames, boards, tapes and finishes, so nothing gets lost in a handoff between trades.
Do you build bulkheads around ducting in Edgemont?: Yes — bulkheads and soffits to box in ductwork, plumbing and lighting are part of nearly every basement frame.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Framing

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Framing Edgemont Edmonton

Framing in Edgemont, set out for the board that follows