Can you tape and mud an Allard wall after a repair?

Yes — we tape, mud and texture-match Allard repairs so they blend seamlessly into the surrounding wall.

Do you skim coat over old texture or after wallpaper removal?

Yes — we skim-coat walls and ceilings flat over old stipple and texture, and after wallpaper removal. It is one of the most common ways Edmonton homeowners modernize a dated room to a smooth, paintable finish.

Do you finish drywall I boarded myself in Allard?

All the time. We finish DIY board jobs across Allard and the surrounding area regularly — basements, home offices, garage conversions, room additions. We assess what is there and give you a straight price to bring the Allard walls to a paint-ready finish. We do not reboard an Allard wall unless there is no other way.

Will the Allard walls be paint-ready when you are done?

Yes. We sand flat, clean the dust and walk every Allard job with you before we pack out. Your painter can start the next day. If anything is off on an Allard job, we return and fix it.

Do Allard repairs get taped and mudded too?

Yes — taped, mudded and blended, Allard repairs read as original wall.

How many mud coats does an Allard wall get?

Typically three coats — tape coat, fill coat and finish coat — with full drying time between each, more for a Level 5 skim in your Allard home.

Drywall Taping & Mudding Allard Edmonton | Level 5 Finish

Seamless Allard walls — taped and mudded as one

The Allard finish stage takes bare board to a finished room — seams smooth, corners crisp, joints gone under paint. In Allard we tape and mud new construction, renovations and repairs to the finish level the job calls for. Allard is an older Southwest community where settling cracks, aging texture and the occasional plaster repair come up, so the finishing work here is steady. We cover Allard, Ambleside, Blackburne, Blackmud Creek and Southwest, 7 days a week.

Corner bead on every outside corner
Multiple mud coats with full dry time between each
Sanded flat — no ridges in raking light
Three-coat taping and mudding in Allard — Level 4 as standard
New-build boarding and finishing in Allard
Re-finishing failed taping — bubbled tape, cracked and ridged seams
Ceilings, bulkheads and archways in Allard homes

Level 4 as our standard, not as an upgrade

What the finish level means here

Level 4 is where we start rather than something added to the quote later. Every joint is taped to it, every texture matched precisely, and the surface is left paint-ready when we leave.

Quoted once, on site

We give Allard homeowners a fixed price at the on-site quote and the number does not change. Free on-site quotes and a same-day reply, 7 days a week, across Allard, Ambleside, Blackburne, Blackmud Creek and surrounding communities. Call or text ' . emp_phone() . '.

Why Allard homeowners trust Emplastrum for taping and mudding

Finishing is our specialty

We are a mudding and taping specialist — the finish in Ambleside, Blackburne, Blackmud Creek is the same standard we put on new-build showhomes across Edmonton.

Fixed price, same-day reply

We tape and mud across Ambleside, Blackburne, Blackmud Creek and Southwest, 7 days a week. Free at-home Allard quoting, fixed pricing, and work we stand behind. When an Allard job is not right, we make it right — on us.

About Drywall Taping & Mudding in Allard

Drywall Taping & Mudding in Allard — what to expect

We provide drywall taping & mudding services in Allard and surrounding communities, 7 days a week. Allard is one of Southwest’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Southwest area.

Fixed price — assessed on site in Allard

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

Types of Drywall Taping & Mudding work in Allard

New installs, renovation work and repair in Allard

We handle the full range of drywall taping & mudding work in Allard — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Allard

Legal suite work in Allard requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Our Allard taping and mudding process, step by step

Tape every seam

In Allard we tape all seams and corners first, bedding the tape so it does not bubble or crack later.

Coats, drying time and sanding

We apply mud in coats with full drying time between each, sanding flat and feathering the edges well past the seam, then check under raking light before we call it done.

Finish levels explained for Allard

Level 4 — the standard for most walls

Level 4 coats the seams and screws flat and smooth, correct for most Allard walls under flat paint.

Level 5 — for critical light and gloss paint

Level 5 adds a full skim coat over the entire surface, worth it in Allard where light, gloss paint or dark colours would show flaws a Level 4 hides. See our Level 5 finish page.

How it works

Simple, clean, on schedule — Taping & Mudding in Allard Edmonton

Free quote

We come out to your Allard Edmonton property, take a real look at the taping & mudding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every taping & mudding quote in Allard Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the taping & mudding in Allard Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Allard Edmonton home while we finish the taping & mudding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished taping & mudding with us and you're happy with the result in Allard Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the taping & mudding contractor Allard Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your taping & mudding project in Allard Edmonton.

Read our reviews on Google

FAQ — Drywall Taping & Mudding Allard Edmonton

Drywall Taping & Mudding Allard Edmonton: your questions answered

Can you tape and mud an Allard wall after a repair?: Yes — we tape, mud and texture-match Allard repairs so they blend seamlessly into the surrounding wall.
Do you skim coat over old texture or after wallpaper removal?: Yes — we skim-coat walls and ceilings flat over old stipple and texture, and after wallpaper removal. It is one of the most common ways Edmonton homeowners modernize a dated room to a smooth, paintable finish.
Do you finish drywall I boarded myself in Allard?: All the time. We finish DIY board jobs across Allard and the surrounding area regularly — basements, home offices, garage conversions, room additions. We assess what is there and give you a straight price to bring the Allard walls to a paint-ready finish. We do not reboard an Allard wall unless there is no other way.
Will the Allard walls be paint-ready when you are done?: Yes. We sand flat, clean the dust and walk every Allard job with you before we pack out. Your painter can start the next day. If anything is off on an Allard job, we return and fix it.
Do Allard repairs get taped and mudded too?: Yes — taped, mudded and blended, Allard repairs read as original wall.
How many mud coats does an Allard wall get?: Typically three coats — tape coat, fill coat and finish coat — with full drying time between each, more for a Level 5 skim in your Allard home.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Taping & Mudding Allard Edmonton

Seamless Allard walls — taped and mudded as one