Will the framing survive a Ormsby Place drywall tear-out?

Yes — we strip Ormsby Place board carefully so framing, wires, pipes and ducts survive ready for the next stage.

Do I need an asbestos test before demolition?

If the Ormsby Place house is pre-1990 and the material is unknown, yes. Joint compound and older texture can contain it, and it is harmless undisturbed but hazardous once broken up. We will not eyeball that for you — testing is cheap next to contaminating a house.

Can you remove Ormsby Place drywall without damaging the framing?

Yes — Ormsby Place tear-outs are careful: studs, wiring, plumbing and ducts behind the board stay intact and stage-ready.

Do you also do the rebuild after demolition in Ormsby Place?

Yes — one continuous Ormsby Place job: tear-out, then framing, insulation and new drywall.

Do you remove ceiling drywall too in Ormsby Place?

Yes — we tear out whole Ormsby Place ceilings, textured and popcorn types included.

Is it cheaper to strip just the damaged part?

On a small Ormsby Place area, usually yes. Past roughly half a wall, taking it to framing is faster and gives a better finish, because a strip-back leaves an awkward join to blend.

Drywall Removal & Demolition Ormsby Place Edmonton | Tear-Out

Stripping walls and ceilings in Ormsby Place back to framing

In Ormsby Place, once a job goes past patching, tear-out comes first. In Ormsby Place we remove old drywall from walls and ceilings, strip it back to the studs or framing, haul the debris off site, and leave the space ready for the next stage. Ormsby Place is an West Edmonton community with a mix of older homes and newer builds, so tear-out scopes here range from straightforward newer-home removal to older homes where plaster or extra layers need careful handling. We cover Ormsby Place, Aldergrove, Belmead, Callingwood North and West Edmonton, 7 days a week.

Full-room and whole-basement demolition
Debris hauled and disposed of
Dust containment and floor protection
Wall and ceiling drywall tear-out in Ormsby Place
Careful removal around wiring, plumbing and ductwork
Prep for new framing, insulation or drywall
Ormsby Place coverage — we come to you

Ceilings come down differently to walls

Gravity and overhead work

A Ormsby Place ceiling drops onto you rather than away from you, and the debris is heavier than it looks. It also exposes insulation, wiring and sometimes a century of accumulated dust in one go.

How we sequence it

Ceilings come down before walls so debris falls onto a floor that is still protected, and the room is cleared rather than worked around. It is slower and it is the difference between a controlled strip and a mess.

Ormsby Place drywall in context

About Ormsby Place

Named for the man responsible for developing Edmonton's grid system of numbering streets and avenues, Ormsby Place is located in the City's west end.

What we see in Ormsby Place

In Ormsby Place the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our Ormsby Place drywall removal process, step by step

Protect, then tear out

We mask off the work area, protect floors, and cover openings to the rest of the Ormsby Place home before anything comes down, because demolition dust travels fast if it is not contained.

Careful removal and haul-away

We tear out the drywall, working carefully around any wiring, plumbing or ductwork we find, then bag and haul the debris off site.

Screws, nails and what the framing looks like after

The stage nobody prices

After board comes off a Ormsby Place wall, the framing is left studded with screws, nails and glue residue. New board over that will not sit flat.

Prep is part of removal

Fasteners come out, adhesive is scraped, and any framing damaged during removal is flagged. A demolition that stops at 'the board is off' hands the next trade a problem, and if we are also boarding it, that problem is ours.

What happens to the debris

Volume is the surprise

Drywall is dense. A single Ormsby Place room generates more weight than most people picture, and it cannot go in a household bin.

Disposal and recycling

Clean gypsum can often be recycled where a facility accepts it; board contaminated with insulation, plastic or suspect material cannot. We tell you which category the job falls into up front, because disposal is a real line in the price rather than an afterthought.

When demolition uncovers something better left alone

Knob-and-tube, old ducting, structural surprises

Opening walls in an older Ormsby Place home reveals what is actually in them, and it is not always what the last renovation claimed.

How we handle it

We stop at the discovery, photograph it, and give you the options with what each costs. What we will not do is close it up quietly because it is inconvenient — the wall is open now, and that is the cheapest it will ever be to deal with.

What affects the cost of drywall removal in Ormsby Place?

Area, ceiling height and disposal

The cost of tear-out in Ormsby Place depends on the square footage of wall and ceiling coming down, the ceiling height and access, and debris disposal. We assess on site and price it before we start.

What is behind the drywall in Ormsby Place homes

Tear-out scopes here range from straightforward newer-home removal to older homes where plaster or extra layers need careful handling.

How it works

Simple, clean, on schedule — Drywall Removal & Demolition in Ormsby Place Edmonton

Free quote

We come out to your Ormsby Place Edmonton property, take a real look at the drywall removal & demolition, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall removal & demolition quote in Ormsby Place Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall removal & demolition in Ormsby Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ormsby Place Edmonton home while we finish the drywall removal & demolition to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall removal & demolition with us and you're happy with the result in Ormsby Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall removal & demolition contractor Ormsby Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall removal & demolition project in Ormsby Place Edmonton.

Read our reviews on Google

FAQ — Drywall Removal & Demolition Ormsby Place Edmonton

Drywall Removal & Demolition Ormsby Place Edmonton: your questions answered

Will the framing survive a Ormsby Place drywall tear-out?: Yes — we strip Ormsby Place board carefully so framing, wires, pipes and ducts survive ready for the next stage.
Do I need an asbestos test before demolition?: If the Ormsby Place house is pre-1990 and the material is unknown, yes. Joint compound and older texture can contain it, and it is harmless undisturbed but hazardous once broken up. We will not eyeball that for you — testing is cheap next to contaminating a house.
Can you remove Ormsby Place drywall without damaging the framing?: Yes — Ormsby Place tear-outs are careful: studs, wiring, plumbing and ducts behind the board stay intact and stage-ready.
Do you also do the rebuild after demolition in Ormsby Place?: Yes — one continuous Ormsby Place job: tear-out, then framing, insulation and new drywall.
Do you remove ceiling drywall too in Ormsby Place?: Yes — we tear out whole Ormsby Place ceilings, textured and popcorn types included.
Is it cheaper to strip just the damaged part?: On a small Ormsby Place area, usually yes. Past roughly half a wall, taking it to framing is faster and gives a better finish, because a strip-back leaves an awkward join to blend.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Removal & Demolition Ormsby Place Edmonton

Stripping walls and ceilings in Ormsby Place back to framing