Do you haul away the debris in Newton?

Yes — disposal is built into every Newton quote; the scrap leaves with us. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.

How much dust will this make?

A lot, which is why containment matters more than speed. Poly at the openings, protected routes, covered furnace returns and daily cleanup. We will tell you honestly which days the space is unusable rather than promise it stays clean.

Can board come off Newton walls with the studs left intact?

Yes — careful Newton demolition leaves studs and hidden services untouched and ready to build on.

Can you remove Newton drywall without damaging the framing?

Yes — Newton tear-outs are careful: studs, wiring, plumbing and ducts behind the board stay intact and stage-ready.

Do you also do the rebuild after demolition in Newton?

Yes — one continuous Newton job: tear-out, then framing, insulation and new drywall.

Is it cheaper to strip just the damaged part?

On a small Newton area, usually yes. Past roughly half a wall, taking it to framing is faster and gives a better finish, because a strip-back leaves an awkward join to blend.

Drywall Removal & Demolition Newton Edmonton | Tear-Out

Stripping walls and ceilings in Newton back to framing

Every Newton renovation or repair deeper than a patch starts with tear-out. In Newton we remove old drywall from walls and ceilings, strip it back to the studs or framing, haul the debris off site, and leave the space ready for the next stage. Newton is an North Central community with a mix of older homes and newer builds, so tear-out scopes here range from straightforward newer-home removal to older homes where plaster or extra layers need careful handling. We cover Newton, Abbottsfield, Alberta Avenue, Beacon Heights and North Central, 7 days a week.

Full-room and whole-basement demolition
Debris hauled and disposed of
Wall and ceiling drywall tear-out in Newton
Careful removal around wiring, plumbing and ductwork
Newton coverage — we come to you
Prep for new framing, insulation or drywall
Dust containment and floor protection

Making the space safe overnight

Between demolition and rebuild

An Newton room stripped to framing has exposed edges, open boxes and sometimes an open ceiling. If the family is still in the house, that gap between days matters.

What we do at the end of a day

Exposed wiring is capped or made safe by the electrician, sharp edges dealt with, debris removed rather than piled, and the containment left intact. It costs a little time each day and it is not optional.

Newton drywall in context

About Newton

Newton for Reverend William Newton, (who arrived in Edmonton in 1875), Newton's development has been spread out over several decades.

What we see in Newton

In Newton the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Containment, and why it decides the whole job

Dust travels further than people expect

Drywall demolition in Newton produces fine dust that moves through a house on air currents and settles in rooms nobody worked in.

What containment actually involves

Poly walls at the openings, floor protection on the route out, and negative pressure or a sealed room where the job justifies it. Furnace returns in the work area get covered, because a running furnace will distribute dust through the whole house in an afternoon.

Fire-rated and party walls during demolition

Do not open one casually

A rated separation between an Newton garage and the house, or between two units, is an assembly. Taking board off it means it has to be rebuilt to that assembly, not just re-boarded.

Why we flag it early

The cost and the inspection requirement change. Finding out at the finish stage that a wall needed a rated rebuild is the expensive version of this conversation.

Poly-B, plumbing repipes and access holes

Targeted openings, not demolition

A Newton Poly-B repipe needs the plumber to reach the runs. That is a series of deliberate access holes, cut where the plumber needs them and where they are easiest to close.

Coordinating it

Cutting more than necessary makes the patching bill larger; cutting too little means the plumber cuts their own, usually in worse places. We would rather walk the route with the plumber first than react afterwards.

What has to happen before anything comes down

Power and water first

Before a wall opens in Newton we identify what runs through it. Live circuits, water lines and gas all sit inside walls that look ordinary from the room side.

Why we ask about the age of the house

The service locations in a 1950s Newton home are not where they are in a 2010 build, and the assumption that they are is how a demolition day turns into an emergency call. If drawings exist we want them; if they do not, we open cautiously and look.

Why Newton homeowners trust Emplastrum for drywall removal

Clean tear-out, not a mess left behind

Demolition done right protects the rest of your Newton home and leaves the space genuinely ready for the next trade — that is how we run every tear-out.

Fixed price, same-day reply

We cover Newton and North Central, 7 days a week. For Newton homeowners: free quote, fixed number, backed workmanship.

How it works

Simple, clean, on schedule — Drywall Removal & Demolition in Newton Edmonton

Free quote

We come out to your Newton Edmonton property, take a real look at the drywall removal & demolition, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall removal & demolition quote in Newton Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall removal & demolition in Newton Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Newton Edmonton home while we finish the drywall removal & demolition to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall removal & demolition with us and you're happy with the result in Newton Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall removal & demolition contractor Newton Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall removal & demolition project in Newton Edmonton.

Read our reviews on Google

FAQ — Drywall Removal & Demolition Newton Edmonton

Drywall Removal & Demolition Newton Edmonton: your questions answered

Do you haul away the debris in Newton?: Yes — disposal is built into every Newton quote; the scrap leaves with us. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.
How much dust will this make?: A lot, which is why containment matters more than speed. Poly at the openings, protected routes, covered furnace returns and daily cleanup. We will tell you honestly which days the space is unusable rather than promise it stays clean.
Can board come off Newton walls with the studs left intact?: Yes — careful Newton demolition leaves studs and hidden services untouched and ready to build on.
Can you remove Newton drywall without damaging the framing?: Yes — Newton tear-outs are careful: studs, wiring, plumbing and ducts behind the board stay intact and stage-ready.
Do you also do the rebuild after demolition in Newton?: Yes — one continuous Newton job: tear-out, then framing, insulation and new drywall.
Is it cheaper to strip just the damaged part?: On a small Newton area, usually yes. Past roughly half a wall, taking it to framing is faster and gives a better finish, because a strip-back leaves an awkward join to blend.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Removal & Demolition Newton Edmonton

Stripping walls and ceilings in Newton back to framing