Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Westridge. In Westridge, the wall board tucks under the ceiling board to support it. Out of order, Westridge ceiling joints carry their own weight and crack sooner. In Westridge, walls wait until the ceiling is boarded.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Do you do drywall installation in Westridge?

Yes — Westridge is part of our regular service area, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.

Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

Do you stand behind your installation work in Westridge?

Yes. Before leaving Westridge, we walk the boarding together and fix anything not right.

Drywall Installation Westridge Edmonton | Board & Tape

Drywall installation in Westridge — hung straight, screwed off right

The Westridge finish is only as good as the boarding under it. We board Westridge level with proper screws, framed seams and tidy cuts around corners and mechanical. Westridge is a higher-end West Edmonton community where boarding quality is expected to be consistent with the quality of the rest of the home. We cover Westridge, Aldergrove, Belmead, Callingwood North and the surrounding area, 7 days a week.

Fire-rated plus soundproof board on Westridge suite separations
Basement boarding — ceiling first, walls second
Renovation reboarding — removing old board, installing new to current spec
Correct screw pattern and every seam on framing in Westridge
Tape-ready Westridge boarding, nothing for the taping crew to fix
Westridge legal-suite separations get fire-rated and soundproof board
No rework in Westridge — the board is ready for tape when we go

Our Drywall Installation process in Westridge in Edmonton

Assess before we start — always in Westridge

Every job in Westridge starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Westridge

When we leave your Westridge home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Westridge drywall in context

About Westridge

Westridge is a long narrow neighbourhood extending into the North Saskatchewan River Valley.

What we see in Westridge

In Westridge the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Board layout is decided before the first sheet

Where the joints land

On an Westridge wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Westridge homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Westridge and Aldergrove, Belmead, Callingwood North

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Westridge, Aldergrove, Belmead, Callingwood North and surrounding communities. Call or text ' . emp_phone() . '.

Drywall installation work we do in Westridge in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Westridge, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Drywall board types used in Westridge homes

Standard 1/2” drywall — the right choice for most Westridge walls

Standard 1/2” drywall is correct for interior walls and ceilings in Westridge homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Westridge walls and ceilings should be. Most interior walls and ceilings in Westridge homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Westridge

Exterior basement walls in Westridge homes need moisture-resistant board. In Westridge, every bathroom and laundry wall takes moisture-resistant board. An Westridge suite ceiling must carry 5/8” Type X fire-rated board. In Westridge, the suite-to-main party wall takes STC soundproof board. The right board per Westridge surface is set at the quote for a clean inspection.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Westridge bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Westridge, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

How it works

Simple, clean, on schedule — Drywall Installation in Westridge Edmonton

Free quote

We come out to your Westridge Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Westridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Westridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Westridge Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Westridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Westridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Westridge Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Westridge Edmonton

Drywall Installation Westridge Edmonton: your questions answered

Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Westridge. In Westridge, the wall board tucks under the ceiling board to support it. Out of order, Westridge ceiling joints carry their own weight and crack sooner. In Westridge, walls wait until the ceiling is boarded.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
Do you do drywall installation in Westridge in Edmonton?: Yes — Westridge is part of our regular service area, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
Do you stand behind your installation work in Westridge?: Yes. Before leaving Westridge, we walk the boarding together and fix anything not right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Westridge Edmonton

Drywall installation in Westridge — hung straight, screwed off right