Does Westmount taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Westmount.

Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Is drywall installation in Westmount a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

For Westmount exterior basement walls, what board do you use?

In Westmount, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Westmount home.

Drywall Installation Westmount Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

Good drywall installation is what makes a good Westmount finish possible. We hang Westmount board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Westmount homes from the late 1980s and 1990s are at the age where renovation room additions and water damage reboarding are the most common boarding calls. We cover Westmount, Boyle Street, Central McDougall, Dovercourt and the surrounding area, 7 days a week.

Drywall boarding and hanging in Westmount — new builds and renovations
Moisture-resistant board for Westmount exterior and wet-area walls
Westmount coverage — we come to you
Fire-rated 5/8” Type X on suite ceilings where required
Suite separations in Westmount boarded fire-rated and soundproof
Fire-rated and soundproof board for Westmount legal-suite separations
STC soundproof board on party walls for legal suites

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Westmount house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

Westmount drywall in context

About Westmount

Westmount likely takes its name from an affluent, predominantly Anglophone, city on the west island of Montreal.

What we see in Westmount

In Westmount the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Westmount bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Westmount, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Drywall board types for Westmount homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Westmount away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Westmount surface before we pull the first sheet.

Why Westmount homeowners trust Emplastrum for drywall installation in Edmonton

Board it right for the finish

Behind every Westmount taping problem we have fixed was a boarding problem first. We board every Westmount job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Westmount and Central, 7 days a week. For Westmount homeowners: free quote, fixed number, backed workmanship. Any issue on an Westmount boarding job earns a return trip and a proper fix.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Boyle Street, Central McDougall, Dovercourt and Edmonton, 7 days a week — every established and newer Edmonton community from Boyle Street, Central McDougall, Dovercourt to Boyle Street, Central McDougall, Dovercourt. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Westmount wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Westmount jobs. We hold Westmount board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

How it works

Simple, clean, on schedule — Drywall Installation in Westmount Edmonton

Free quote

We come out to your Westmount Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Westmount Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Westmount Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Westmount Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Westmount Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Westmount Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Westmount Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Westmount Edmonton

Drywall Installation Westmount Edmonton: your questions answered

Does Westmount taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Westmount.
Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
Is drywall installation in Westmount a fixed price in Edmonton?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
For Westmount exterior basement walls, what board do you use?: In Westmount, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Westmount home.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Westmount Edmonton

Drywall installation hung straight and screwed off right