Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Walker: the quoted timeline is the real one. The taping crew can usually start the next day.

Do you do drywall installation in Walker?

Yes — Walker is part of our regular service area, and we are usually booked within the week. We also cover Charlesworth, Decoteau, Ellerslie and Ellerslie.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

How do you handle texture matching after drywall installation work in Walker?

Texture matching is part of every repair and patch job we do in Walker. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Drywall Installation Walker Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

Good drywall installation is what makes a good Walker finish possible. We hang Walker board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Walker homes from the late 1980s and 1990s are at the age where renovation room additions and water damage reboarding are the most common boarding calls. We cover Walker, Charlesworth, Decoteau, Ellerslie and the surrounding area, 7 days a week.

Basement boarding — ceiling first, walls second
Left ready for taper — no rework needed
Walker basement development boarded ceiling-first, then walls
Basement development boarding in Walker — ceiling first, then walls
Walker exterior walls and wet areas get moisture-resistant board
Correct screw pattern throughout — all seams on framing
Bulkheads, soffits, archways and vaulted ceiling work

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Walker wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Walker jobs. We hold Walker board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Walker homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Walker and Charlesworth, Decoteau, Ellerslie

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Walker, Charlesworth, Decoteau, Ellerslie and surrounding communities. Call or text ' . emp_phone() . '.

Our Walker drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Walker starts with the ceiling, because the wall board butts up under it and helps carry it. In Walker, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Walker, completed boarding hands straight to taping with nothing to fix.

Types of Drywall Installation work in Walker in Edmonton

New installs, renovation work and repair in Walker

We handle the full range of drywall installation work in Walker — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Walker

Legal suite work in Walker requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Charlesworth, Decoteau, Ellerslie — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Charlesworth, Decoteau, Ellerslie — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

Drywall installation work we do in Walker in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Walker, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

How it works

Simple, clean, on schedule — Drywall Installation in Walker Edmonton

Free quote

We come out to your Walker Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Walker Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Walker Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Walker Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Walker Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Walker Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Walker Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Walker Edmonton

Drywall Installation Walker Edmonton: your questions answered

Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
How long does drywall installation take in a Edmonton home in Edmonton?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Walker: the quoted timeline is the real one. The taping crew can usually start the next day.
Do you do drywall installation in Walker in Edmonton?: Yes — Walker is part of our regular service area, and we are usually booked within the week. We also cover Charlesworth, Decoteau, Ellerslie and Ellerslie.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
How do you handle texture matching after drywall installation work in Walker in Edmonton?: Texture matching is part of every repair and patch job we do in Walker. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Walker Edmonton

Drywall installation hung straight and screwed off right