Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Sweet Grass. In Sweet Grass, the wall board tucks under the ceiling board to support it. Out of order, Sweet Grass ceiling joints carry their own weight and crack sooner. In Sweet Grass, walls wait until the ceiling is boarded.

What board do you use on exterior basement walls in Edmonton?

In Sweet Grass, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Sweet Grass interior walls get standard 1/2” board. Legal suites in Sweet Grass take 5/8” Type X on the ceiling and soundproof party walls. Each Sweet Grass surface gets its board product confirmed at the quote.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

Do you stand behind your installation work in Sweet Grass?

Yes. Before leaving Sweet Grass, we walk the boarding together and fix anything not right.

Drywall Installation Sweet Grass Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

Good drywall installation is what makes a good Sweet Grass finish possible — seams on framing, the right screw pattern, board plumb before a single coat of mud goes on. In Sweet Grass we board new builds, basements and renovations the way a finishing specialist wants it boarded. Sweet Grass is an older Whitemud community where settling cracks, aging texture and the occasional plaster repair come up, so the installation work here is usually settling cracks, aging stipple and the odd plaster repair. We cover Sweet Grass, Aspen Gardens, Bearspaw, Blue Quill and Whitemud, 7 days a week.

Ceiling-then-walls basement boarding across Sweet Grass
Fire-rated plus soundproof board on Sweet Grass suite separations
Room additions, garage conversions and flex room boarding
Sweet Grass exterior walls and wet areas get moisture-resistant board
Tape-ready Sweet Grass boarding, nothing for the taping crew to fix
Correct screw pattern and every seam on framing in Sweet Grass
Right screw pattern, all seams landed on framing in Sweet Grass

Our drywall installation process in Sweet Grass in Edmonton, step by step

Ceiling board first — always — in Sweet Grass homes

Every boarding job in Sweet Grass starts with the ceiling. In Sweet Grass we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Sweet Grass order and the ceiling joints go unsupported and crack. In Sweet Grass, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Sweet Grass

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Sweet Grass, every seam lands on framing, never mid-bay. In Sweet Grass, every inside and outside corner is square and clean. In Sweet Grass, board stops clean at window and door frames. When the boarding is done in an Sweet Grass home, every surface is at the right plane and the taping crew can go straight to work.

Sweet Grass drywall in context

About Sweet Grass

The neighbourhood is named in honour of the Cree Indian Chief Sweet Grass who was one of the early west's first conservationists and instrumental in the protection of the Plains Bison.

What we see in Sweet Grass

In Sweet Grass the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Drywall board types used in Sweet Grass homes

Standard 1/2” drywall — the right choice for most Sweet Grass walls

Standard 1/2” drywall is correct for interior walls and ceilings in Sweet Grass homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Sweet Grass walls and ceilings should be. Most interior walls and ceilings in Sweet Grass homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Sweet Grass

Exterior basement walls in Sweet Grass homes need moisture-resistant board. In Sweet Grass, every bathroom and laundry wall takes moisture-resistant board. An Sweet Grass suite ceiling must carry 5/8” Type X fire-rated board. In Sweet Grass, the suite-to-main party wall takes STC soundproof board. The right board per Sweet Grass surface is set at the quote for a clean inspection.

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Sweet Grass room where they will show through the finish.

Board layout is decided before the first sheet

Where the joints land

On an Sweet Grass wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

Our Sweet Grass drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Sweet Grass starts with the ceiling, because the wall board butts up under it and helps carry it. In Sweet Grass, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Sweet Grass, completed boarding hands straight to taping with nothing to fix.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Sweet Grass bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Sweet Grass, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

How it works

Simple, clean, on schedule — Drywall Installation in Sweet Grass Edmonton

Free quote

We come out to your Sweet Grass Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Sweet Grass Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Sweet Grass Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Sweet Grass Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Sweet Grass Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Sweet Grass Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Sweet Grass Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Sweet Grass Edmonton

Drywall Installation Sweet Grass Edmonton: your questions answered

Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Sweet Grass. In Sweet Grass, the wall board tucks under the ceiling board to support it. Out of order, Sweet Grass ceiling joints carry their own weight and crack sooner. In Sweet Grass, walls wait until the ceiling is boarded.
What board do you use on exterior basement walls in Edmonton?: In Sweet Grass, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Sweet Grass interior walls get standard 1/2” board. Legal suites in Sweet Grass take 5/8” Type X on the ceiling and soundproof party walls. Each Sweet Grass surface gets its board product confirmed at the quote.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
Do you stand behind your installation work in Sweet Grass?: Yes. Before leaving Sweet Grass, we walk the boarding together and fix anything not right.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Sweet Grass Edmonton

Drywall installation hung straight and screwed off right