How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Summerside: the quoted timeline is the real one. The taping crew can usually start the next day.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Do you stand behind your installation work in Summerside?

Yes. Before leaving Summerside, we walk the boarding together and fix anything not right.

What board do you use for exterior basement walls in Summerside?

Every Summerside foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Summerside interior walls away from moisture take standard 1/2” board. Summerside suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Summerside surface is set at the on-site quote.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

For Summerside exterior basement walls, what board do you use?

In Summerside, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Summerside home.

Drywall Installation Summerside Edmonton | Board & Tape

Drywall installation in Summerside, hung straight and screwed off right

In Summerside, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Summerside standard. Summerside is one of Edmonton’s oldest communities. Renovation boarding in homes from the 1950s, 1960s and 1970s is the most common installation work here. We cover Summerside, Charlesworth, Decoteau, Ellerslie and the surrounding area, 7 days a week.

Fire-rated 5/8” Type X on suite ceilings where required
STC soundproof board on party walls for legal suites
Summerside board hung on the correct screw pattern, seams on framing
Exterior and wet-area Summerside walls boarded moisture-resistant
Fire-rated and soundproof board for Summerside legal-suite separations
Suite separations in Summerside boarded fire-rated and soundproof
Drywall boarding and hanging — new builds and renovations

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Summerside bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Summerside, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Drywall board types used in Summerside homes

Standard 1/2” drywall — the right choice for most Summerside walls

Standard 1/2” drywall is correct for interior walls and ceilings in Summerside homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Summerside walls and ceilings should be. Most interior walls and ceilings in Summerside homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Summerside

Exterior basement walls in Summerside homes need moisture-resistant board. In Summerside, every bathroom and laundry wall takes moisture-resistant board. An Summerside suite ceiling must carry 5/8” Type X fire-rated board. In Summerside, the suite-to-main party wall takes STC soundproof board. The right board per Summerside surface is set at the quote for a clean inspection.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Charlesworth, Decoteau, Ellerslie — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Charlesworth, Decoteau, Ellerslie — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

Types of Drywall Installation work in Summerside in Edmonton

New installs, renovation work and repair in Summerside

We handle the full range of drywall installation work in Summerside — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Summerside

Legal suite work in Summerside requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Board layout is decided before the first sheet

Where the joints land

On an Summerside wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Summerside homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Summerside and Charlesworth, Decoteau, Ellerslie

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Summerside, Charlesworth, Decoteau, Ellerslie and surrounding communities. Call or text ' . emp_phone() . '.

How it works

Simple, clean, on schedule — Drywall Installation in Summerside Edmonton

Free quote

We come out to your Summerside Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Summerside Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Summerside Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Summerside Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Summerside Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Summerside Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Summerside Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Summerside Edmonton

Drywall Installation Summerside Edmonton: your questions answered

How long does drywall installation take in a Edmonton home in Edmonton?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Summerside: the quoted timeline is the real one. The taping crew can usually start the next day.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
Do you stand behind your installation work in Summerside?: Yes. Before leaving Summerside, we walk the boarding together and fix anything not right.
What board do you use for exterior basement walls in Summerside?: Every Summerside foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Summerside interior walls away from moisture take standard 1/2” board. Summerside suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Summerside surface is set at the on-site quote.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
For Summerside exterior basement walls, what board do you use?: In Summerside, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Summerside home.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Summerside Edmonton

Drywall installation in Summerside, hung straight and screwed off right