Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Strathearn. In Strathearn, the wall board tucks under the ceiling board to support it. Out of order, Strathearn ceiling joints carry their own weight and crack sooner. In Strathearn, walls wait until the ceiling is boarded.

Do you serve Strathearn on weekends?

Yes — we cover Strathearn and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.

Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Avonmore, Bonnie Doon, Capilano, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

Do you board for legal suites in Strathearn?

Yes, and we know the spec. A legal secondary suite in Strathearn requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Strathearn suites board and pass inspection.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Drywall Installation Strathearn Edmonton | Board & Tape

Drywall installation in Strathearn — right board, right spec, ready to tape

In Strathearn, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Strathearn standard. Strathearn homes from the 2000s and 2010s were built with framed, unfinished basements. Full basement boarding is the most common installation call here. We cover Strathearn, Avonmore, Bonnie Doon, Capilano and the surrounding area, 7 days a week.

Drywall boarding and hanging in Strathearn — new builds and renovations
Ceiling-then-walls basement boarding across Strathearn
Strathearn legal-suite separations get fire-rated and soundproof board
Correct screw pattern and every seam on framing in Strathearn
Suite separations in Strathearn boarded fire-rated and soundproof
In Strathearn, correct screw spacing and seams on framing throughout
Correct screw pattern throughout Strathearn — all seams on framing

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Strathearn suite party walls. We specify the right product for each surface before we pull the first sheet.

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Strathearn room where they will show through the finish.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Strathearn wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Strathearn jobs. We hold Strathearn board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Our Drywall Installation process in Strathearn in Edmonton

Assess before we start — always in Strathearn

Every job in Strathearn starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Strathearn

When we leave your Strathearn home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Our Strathearn drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Strathearn starts with the ceiling, because the wall board butts up under it and helps carry it. In Strathearn, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Strathearn, completed boarding hands straight to taping with nothing to fix.

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Strathearn house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

How it works

Simple, clean, on schedule — Drywall Installation in Strathearn Edmonton

Free quote

We come out to your Strathearn Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Strathearn Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Strathearn Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Strathearn Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Strathearn Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Strathearn Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Strathearn Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Strathearn Edmonton

Drywall Installation Strathearn Edmonton: your questions answered

Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Strathearn. In Strathearn, the wall board tucks under the ceiling board to support it. Out of order, Strathearn ceiling joints carry their own weight and crack sooner. In Strathearn, walls wait until the ceiling is boarded.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
Do you serve Strathearn on weekends?: Yes — we cover Strathearn and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.
Do you cover all of Edmonton for drywall installation in Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Avonmore, Bonnie Doon, Capilano, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
Do you board for legal suites in Strathearn?: Yes, and we know the spec. A legal secondary suite in Strathearn requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Strathearn suites board and pass inspection.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Strathearn Edmonton

Drywall installation in Strathearn — right board, right spec, ready to tape