Is drywall installation in Spruce Grove a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Spruce Grove: the quoted timeline is the real one. The taping crew can usually start the next day.

What board do you use for exterior basement walls in Spruce Grove?

Every Spruce Grove foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Spruce Grove interior walls away from moisture take standard 1/2” board. Spruce Grove suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Spruce Grove surface is set at the on-site quote.

Do you board for legal suites in Spruce Grove?

Yes, and we know the spec. A legal secondary suite in Spruce Grove requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Spruce Grove suites board and pass inspection.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Can the taping crew start right after you board an Spruce Grove home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Spruce Grove.

Drywall Installation Spruce Grove | Board & Tape

Drywall installation in Spruce Grove, hung straight and screwed off right

In Spruce Grove, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Spruce Grove standard. Spruce Grove homes from the 2000s and 2010s were built with framed, unfinished basements. Full basement boarding is the most common installation call here. We cover Spruce Grove, Edmonton and the surrounding area, 7 days a week.

Ceiling-then-walls basement boarding across Spruce Grove
Fire-rated plus soundproof board on Spruce Grove suite separations
Renovation reboarding — removing old board, installing new to current spec
Spruce Grove legal-suite separations get fire-rated and soundproof board
Right screw pattern, all seams landed on framing in Spruce Grove
Spruce Grove exterior walls and wet areas get moisture-resistant board
Moisture-resistant board on Spruce Grove exterior walls and wet areas

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Spruce Grove room where they will show through the finish.

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Spruce Grove house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Spruce Grove suite party walls. We specify the right product for each surface before we pull the first sheet.

Drywall installation work we do in Spruce Grove

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Spruce Grove, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Our drywall installation process in Spruce Grove, step by step

Ceiling board first — always — in Spruce Grove homes

Every boarding job in Spruce Grove starts with the ceiling. In Spruce Grove we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Spruce Grove order and the ceiling joints go unsupported and crack. In Spruce Grove, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Spruce Grove

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Spruce Grove, every seam lands on framing, never mid-bay. In Spruce Grove, every inside and outside corner is square and clean. In Spruce Grove, board stops clean at window and door frames. When the boarding is done in an Spruce Grove home, every surface is at the right plane and the taping crew can go straight to work.

Why Edmonton homeowners trust Emplastrum for drywall installation in Spruce Grove

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Edmonton and Edmonton, 7 days a week — every established and newer Edmonton community from Edmonton to Edmonton. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

How it works

Simple, clean, on schedule — Drywall Installation in Spruce Grove

Free quote

We come out to your Spruce Grove property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Spruce Grove starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Spruce Grove. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Spruce Grove home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Spruce Grove. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Spruce Grove Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Spruce Grove trusts for repair, restoration and finishing — rated on Google by Spruce Grove homeowners.

Read the reviews, or leave your own after your drywall installation project in Spruce Grove.

Read our reviews on Google

FAQ — Drywall Installation Spruce Grove

Drywall Installation Spruce Grove: your questions answered

Is drywall installation in Spruce Grove a fixed price?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.
How long does drywall installation take in a Edmonton home in Spruce Grove?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Spruce Grove: the quoted timeline is the real one. The taping crew can usually start the next day.
What board do you use for exterior basement walls in Spruce Grove?: Every Spruce Grove foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Spruce Grove interior walls away from moisture take standard 1/2” board. Spruce Grove suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Spruce Grove surface is set at the on-site quote.
Do you board for legal suites in Spruce Grove?: Yes, and we know the spec. A legal secondary suite in Spruce Grove requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Spruce Grove suites board and pass inspection.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Can the taping crew start right after you board an Spruce Grove home?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Spruce Grove.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Spruce Grove

Drywall installation in Spruce Grove, hung straight and screwed off right