What board do you use on exterior basement walls in Edmonton?

In Spruce Avenue, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Spruce Avenue interior walls get standard 1/2” board. Legal suites in Spruce Avenue take 5/8” Type X on the ceiling and soundproof party walls. Each Spruce Avenue surface gets its board product confirmed at the quote.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Do you board for legal suites in Spruce Avenue?

Yes, and we know the spec. A legal secondary suite in Spruce Avenue requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Spruce Avenue suites board and pass inspection.

Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

How do you handle texture matching after drywall installation work in Spruce Avenue?

Texture matching is part of every repair and patch job we do in Spruce Avenue. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Abbottsfield, Alberta Avenue, Beacon Heights, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

Drywall Installation Spruce Avenue Edmonton | Board & Tape

Drywall installation in Spruce Avenue — hung straight, screwed off right

The Spruce Avenue finish is only as good as the boarding under it. We board Spruce Avenue level with proper screws, framed seams and tidy cuts around corners and mechanical. Spruce Avenue is a higher-end North Central community where boarding quality is expected to be consistent with the quality of the rest of the home. We cover Spruce Avenue, Abbottsfield, Alberta Avenue, Beacon Heights and the surrounding area, 7 days a week.

No rework in Spruce Avenue: tape-ready boarding when we go
STC soundproof board on party walls for legal suites
Drywall boarding in Spruce Avenue — new builds and renovations
Bulkheads, soffits, archways and ceiling work
Tape-ready Spruce Avenue boarding, nothing for the taping crew to fix
No rework in Spruce Avenue — the board is ready for tape when we go
Suite separations in Spruce Avenue boarded fire-rated and soundproof

Drywall installation work we do in Spruce Avenue in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Spruce Avenue, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Spruce Avenue drywall in context

About Spruce Avenue

Spruce Avenue's central location has attracted Kingsway Garden Mall, The Northern Alberta Institute of Technology and the Municipal Airport.

What we see in Spruce Avenue

In Spruce Avenue the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Spruce Avenue homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Spruce Avenue and Abbottsfield, Alberta Avenue, Beacon Heights

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Spruce Avenue, Abbottsfield, Alberta Avenue, Beacon Heights and surrounding communities. Call or text ' . emp_phone() . '.

Drywall board types for Spruce Avenue homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Spruce Avenue away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Spruce Avenue surface before we pull the first sheet.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Spruce Avenue bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Spruce Avenue, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

What affects the cost of drywall installation in Spruce Avenue in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Spruce Avenue comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Spruce Avenue

The work here usually calls for settling cracks, nail pops and tired texture. The Spruce Avenue quote maps each surface to its correct board — no inspection surprises.

How it works

Simple, clean, on schedule — Drywall Installation in Spruce Avenue Edmonton

Free quote

We come out to your Spruce Avenue Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Spruce Avenue Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Spruce Avenue Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Spruce Avenue Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Spruce Avenue Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Spruce Avenue Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Spruce Avenue Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Spruce Avenue Edmonton

Drywall Installation Spruce Avenue Edmonton: your questions answered

What board do you use on exterior basement walls in Edmonton?: In Spruce Avenue, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Spruce Avenue interior walls get standard 1/2” board. Legal suites in Spruce Avenue take 5/8” Type X on the ceiling and soundproof party walls. Each Spruce Avenue surface gets its board product confirmed at the quote.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
Do you board for legal suites in Spruce Avenue?: Yes, and we know the spec. A legal secondary suite in Spruce Avenue requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Spruce Avenue suites board and pass inspection.
Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
How do you handle texture matching after drywall installation work in Spruce Avenue in Edmonton?: Texture matching is part of every repair and patch job we do in Spruce Avenue. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
Do you cover all of Edmonton for drywall installation in Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Abbottsfield, Alberta Avenue, Beacon Heights, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Spruce Avenue Edmonton

Drywall installation in Spruce Avenue — hung straight, screwed off right