Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Drywall installation in Satoo, hung straight and screwed off right

The Satoo finish is only as good as the boarding under it. We board Satoo level with proper screws, framed seams and tidy cuts around corners and mechanical. Satoo is a higher-end Mill Woods and Meadows community where boarding quality is expected to be consistent with the quality of the rest of the home. We cover Satoo, Bisset, Crawford Plains, Daly Grove and the surrounding area, 7 days a week.

Drywall Installation Satoo Edmonton

Drywall board types used in Satoo homes

Standard 1/2” drywall — the right choice for most Satoo walls

Standard 1/2” drywall is correct for interior walls and ceilings in Satoo homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Satoo walls and ceilings should be. Most interior walls and ceilings in Satoo homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Satoo

Exterior basement walls in Satoo homes need moisture-resistant board. In Satoo, every bathroom and laundry wall takes moisture-resistant board. An Satoo suite ceiling must carry 5/8” Type X fire-rated board. In Satoo, the suite-to-main party wall takes STC soundproof board. The right board per Satoo surface is set at the quote for a clean inspection.

Satoo drywall in context

About Satoo

Named for a Cree chief, the Mill Woods area was a Cree reserve between 1876-1891.

What we see in Satoo

In Satoo the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our drywall installation process in Satoo in Edmonton, step by step

Ceiling board first — always — in Satoo homes

Every boarding job in Satoo starts with the ceiling. In Satoo we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Satoo order and the ceiling joints go unsupported and crack. In Satoo, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Satoo

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Satoo, every seam lands on framing, never mid-bay. In Satoo, every inside and outside corner is square and clean. In Satoo, board stops clean at window and door frames. When the boarding is done in an Satoo home, every surface is at the right plane and the taping crew can go straight to work.

Ceilings first, then walls

The order is not arbitrary

Ceiling board goes up first so the wall sheets push up underneath and support its edges.

What it prevents

Doing it the other way leaves the ceiling perimeter unsupported, and in an Satoo room that is where the cracking starts. It also gives a tighter joint at the wall-ceiling line, which is the joint people look at most.

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Satoo room where they will show through the finish.

Drywall installation work we do in Satoo in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Satoo, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Satoo suite party walls. We specify the right product for each surface before we pull the first sheet.

Simple, clean, on schedule — Drywall Installation in Satoo Edmonton

1

Free quote

We come out to your Satoo Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Satoo Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Satoo Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Satoo Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Satoo Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the drywall installation contractor Satoo Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Satoo Edmonton.

Read our reviews on Google

Drywall Installation Satoo Edmonton: your questions answered

Can the taping crew start right after you board an Satoo home?
Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Satoo.
Do you cover all of Edmonton for drywall installation in Edmonton?
Yes — we cover all four Edmonton quadrants, Edmonton, Bisset, Crawford Plains, Daly Grove, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
Do you board for legal suites in Edmonton?
Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
Do you hang the ceiling board first?
Yes, always. Ceiling board goes up before wall board on every job in Satoo. In Satoo, the wall board tucks under the ceiling board to support it. Out of order, Satoo ceiling joints carry their own weight and crack sooner. In Satoo, walls wait until the ceiling is boarded.
What board do you use on exterior basement walls in Edmonton?
In Satoo, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Satoo interior walls get standard 1/2” board. Legal suites in Satoo take 5/8” Type X on the ceiling and soundproof party walls. Each Satoo surface gets its board product confirmed at the quote.
How long does drywall installation take in a Satoo home in Edmonton?
A standard basement in a Satoo home typically takes one to two days to board. New construction or a big reno in Satoo runs a longer schedule. The Satoo timeline you get at the quote is realistic, not optimistic. In Satoo, finishing usually begins the day after boarding wraps.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook