Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

Can the taping crew start right after you board an Sakaw home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Sakaw.

What board do you use for exterior basement walls in Sakaw?

Every Sakaw foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Sakaw interior walls away from moisture take standard 1/2” board. Sakaw suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Sakaw surface is set at the on-site quote.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Drywall Installation Sakaw Edmonton | Board & Tape

Drywall installation in Sakaw — right board, right spec, ready to tape

A good Sakaw finish starts with good boarding. In Sakaw the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Sakaw is one of Mill Woods and Meadows’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Sakaw, East Hills, Applewood and Edmonton and the surrounding area, 7 days a week.

Moisture-resistant board for Sakaw exterior and wet-area walls
Basement boarding — ceiling first, walls second
Left ready for taper — no rework needed
Moisture-resistant board on Sakaw exterior walls and wet areas
Fire-rated and soundproof board for Sakaw legal-suite separations
Right screw pattern, all seams landed on framing in Sakaw
Basement development boarding in Sakaw — ceiling first, then walls

Our Sakaw drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Sakaw starts with the ceiling, because the wall board butts up under it and helps carry it. In Sakaw, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Sakaw, completed boarding hands straight to taping with nothing to fix.

Sakaw drywall in context

About Sakaw

One of the 27 Mill Woods neighbourhoods, Sakaw means "wooded area" in Cree.

What we see in Sakaw

In Sakaw the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Sakaw suite party walls. We specify the right product for each surface before we pull the first sheet.

What affects the cost of drywall installation in Sakaw in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Sakaw comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Sakaw

The work here usually calls for settling cracks, nail pops and tired texture. The Sakaw quote maps each surface to its correct board — no inspection surprises.

Drywall board types for Sakaw homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Sakaw away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Sakaw surface before we pull the first sheet.

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Sakaw house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Sakaw bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Sakaw, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

How it works

Simple, clean, on schedule — Drywall Installation in Sakaw Edmonton

Free quote

We come out to your Sakaw Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Sakaw Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Sakaw Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Sakaw Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Sakaw Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Sakaw Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Sakaw Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Sakaw Edmonton

Drywall Installation Sakaw Edmonton: your questions answered

Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
Can the taping crew start right after you board an Sakaw home?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Sakaw.
What board do you use for exterior basement walls in Sakaw?: Every Sakaw foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Sakaw interior walls away from moisture take standard 1/2” board. Sakaw suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Sakaw surface is set at the on-site quote.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Sakaw Edmonton

Drywall installation in Sakaw — right board, right spec, ready to tape