Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

Can the taping crew start right after you board an Riverdale home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Riverdale.

Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Boyle Street, Central McDougall, Dovercourt, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

What board do you use for exterior basement walls in Riverdale?

Every Riverdale foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Riverdale interior walls away from moisture take standard 1/2” board. Riverdale suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Riverdale surface is set at the on-site quote.

How long does drywall installation take in an Riverdale home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Riverdale are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Drywall Installation Riverdale Edmonton | Board & Tape

Drywall installation in Riverdale — right board, right spec, ready to tape

A good Riverdale finish starts with good boarding. In Riverdale the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Riverdale is one of Central’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Riverdale, Ambleton, Boyle Street, Central McDougall, Dovercourt and the surrounding area, 7 days a week.

Ceiling-then-walls basement boarding across Riverdale
Basement boarding — ceiling first, walls second
Bulkheads, soffits, archways and ceiling work
Moisture-resistant board on Riverdale exterior walls and wet areas
Correct screw pattern and every seam on framing in Riverdale
Basement development boarding in Riverdale — ceiling first, then walls
Ceiling-first, then-walls basement boarding in Riverdale

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Riverdale room where they will show through the finish.

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Riverdale house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

Drywall installation work we do in Riverdale in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Riverdale, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Boyle Street, Central McDougall, Dovercourt and Edmonton, 7 days a week — every established and newer Edmonton community from Boyle Street, Central McDougall, Dovercourt to Boyle Street, Central McDougall, Dovercourt. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Boyle Street, Central McDougall, Dovercourt — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Boyle Street, Central McDougall, Dovercourt — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Riverdale bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Riverdale, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

How it works

Simple, clean, on schedule — Drywall Installation in Riverdale Edmonton

Free quote

We come out to your Riverdale Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Riverdale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Riverdale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Riverdale Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Riverdale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Riverdale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Riverdale Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Riverdale Edmonton

Drywall Installation Riverdale Edmonton: your questions answered

Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
Can the taping crew start right after you board an Riverdale home?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Riverdale.
Do you cover all of Edmonton for drywall installation in Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Boyle Street, Central McDougall, Dovercourt, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
What board do you use for exterior basement walls in Riverdale?: Every Riverdale foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Riverdale interior walls away from moisture take standard 1/2” board. Riverdale suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Riverdale surface is set at the on-site quote.
How long does drywall installation take in an Riverdale home in Edmonton?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Riverdale are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Riverdale Edmonton

Drywall installation in Riverdale — right board, right spec, ready to tape