Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

Do you do drywall installation in Ritchie?

Yes — Ritchie is part of our regular service area, and we are usually booked within the week. We also cover Allendale, Argyll, Belgravia and Scona.

What board do you use for exterior basement walls in Ritchie?

Every Ritchie foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Ritchie interior walls away from moisture take standard 1/2” board. Ritchie suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Ritchie surface is set at the on-site quote.

For Ritchie exterior basement walls, what board do you use?

In Ritchie, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Ritchie home.

Do you board for legal suites in Ritchie?

Yes, and we know the spec. A legal secondary suite in Ritchie requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Ritchie suites board and pass inspection.

Do you stand behind your installation work in Ritchie?

Yes. Before leaving Ritchie, we walk the boarding together and fix anything not right.

Drywall Installation Ritchie Edmonton | Board & Tape

Drywall installation in Ritchie — hung straight, screwed off right

A good Ritchie finish starts with good boarding. In Ritchie the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Ritchie is one of Scona’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Ritchie, East Hills, Applewood and Edmonton and the surrounding area, 7 days a week.

Ritchie basement development boarded ceiling-first, then walls
Bulkheads, soffits, archways and ceiling work
Suite separations in Ritchie boarded fire-rated and soundproof
Right screw pattern, all seams landed on framing in Ritchie
Ceiling-first, then-walls basement boarding in Ritchie
No rework in Ritchie — the board is ready for tape when we go
Drywall boarding and hanging — new builds and renovations

What affects the cost of drywall installation in Ritchie in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Ritchie comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Ritchie

The work here usually calls for settling cracks, nail pops and tired texture. The Ritchie quote maps each surface to its correct board — no inspection surprises.

Ritchie drywall in context

About Ritchie

Ritchie is a residential neighbourhood in south east Edmonton, developed during the immediate post-war period.

What we see in Ritchie

In Ritchie the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Ritchie bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Ritchie, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Our drywall installation process in Ritchie in Edmonton, step by step

Ceiling board first — always — in Ritchie homes

Every boarding job in Ritchie starts with the ceiling. In Ritchie we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Ritchie order and the ceiling joints go unsupported and crack. In Ritchie, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Ritchie

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Ritchie, every seam lands on framing, never mid-bay. In Ritchie, every inside and outside corner is square and clean. In Ritchie, board stops clean at window and door frames. When the boarding is done in an Ritchie home, every surface is at the right plane and the taping crew can go straight to work.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia and Edmonton, 7 days a week — every established and newer Edmonton community from Allendale, Argyll, Belgravia to Allendale, Argyll, Belgravia. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Why Ritchie homeowners trust Emplastrum for drywall installation in Edmonton

Board it right for the finish

Behind every Ritchie taping problem we have fixed was a boarding problem first. We board every Ritchie job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Ritchie and Scona, 7 days a week. For Ritchie homeowners: free quote, fixed number, backed workmanship. Any issue on an Ritchie boarding job earns a return trip and a proper fix.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Allendale, Argyll, Belgravia — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Allendale, Argyll, Belgravia — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

How it works

Simple, clean, on schedule — Drywall Installation in Ritchie Edmonton

Free quote

We come out to your Ritchie Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Ritchie Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Ritchie Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ritchie Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Ritchie Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Ritchie Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Ritchie Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Ritchie Edmonton

Drywall Installation Ritchie Edmonton: your questions answered

Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
Do you do drywall installation in Ritchie in Edmonton?: Yes — Ritchie is part of our regular service area, and we are usually booked within the week. We also cover Allendale, Argyll, Belgravia and Scona.
What board do you use for exterior basement walls in Ritchie?: Every Ritchie foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Ritchie interior walls away from moisture take standard 1/2” board. Ritchie suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Ritchie surface is set at the on-site quote.
For Ritchie exterior basement walls, what board do you use?: In Ritchie, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Ritchie home.
Do you board for legal suites in Ritchie?: Yes, and we know the spec. A legal secondary suite in Ritchie requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Ritchie suites board and pass inspection.
Do you stand behind your installation work in Ritchie?: Yes. Before leaving Ritchie, we walk the boarding together and fix anything not right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Ritchie Edmonton

Drywall installation in Ritchie — hung straight, screwed off right