Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Ozerna. In Ozerna, the wall board tucks under the ceiling board to support it. Out of order, Ozerna ceiling joints carry their own weight and crack sooner. In Ozerna, walls wait until the ceiling is boarded.

How do you handle texture matching after drywall installation work in Ozerna?

Texture matching is part of every repair and patch job we do in Ozerna. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Do you board for legal suites in Ozerna?

Yes, and we know the spec. A legal secondary suite in Ozerna requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Ozerna suites board and pass inspection.

What board do you use on exterior basement walls in Edmonton?

In Ozerna, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Ozerna interior walls get standard 1/2” board. Legal suites in Ozerna take 5/8” Type X on the ceiling and soundproof party walls. Each Ozerna surface gets its board product confirmed at the quote.

For Ozerna exterior basement walls, what board do you use?

In Ozerna, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Ozerna home.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Drywall Installation Ozerna Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

Good drywall installation is what makes a good Ozerna finish possible — seams on framing, the right screw pattern, board plumb before a single coat of mud goes on. In Ozerna we board new builds, basements and renovations the way a finishing specialist wants it boarded. Ozerna is an older Northeast community where settling cracks, aging texture and the occasional plaster repair come up, so the installation work here is usually settling cracks, aging stipple and the odd plaster repair. We cover Ozerna, Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Ozerna screw spacing to spec, seams landed on framing
Moisture-resistant board on exterior foundation walls and wet areas
Ozerna boarding left tape-ready, no rework for the finishers
Correct screw pattern and every seam on framing in Ozerna
Bulkheads, soffits, archways and vaulted ceiling work
Moisture-resistant board on Ozerna exterior walls and wet areas
Right screw pattern, all seams landed on framing in Ozerna

Drywall board types used in Ozerna homes

Standard 1/2” drywall — the right choice for most Ozerna walls

Standard 1/2” drywall is correct for interior walls and ceilings in Ozerna homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Ozerna walls and ceilings should be. Most interior walls and ceilings in Ozerna homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Ozerna

Exterior basement walls in Ozerna homes need moisture-resistant board. In Ozerna, every bathroom and laundry wall takes moisture-resistant board. An Ozerna suite ceiling must carry 5/8” Type X fire-rated board. In Ozerna, the suite-to-main party wall takes STC soundproof board. The right board per Ozerna surface is set at the quote for a clean inspection.

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Ozerna room where they will show through the finish.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Ozerna bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Ozerna, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Ozerna suite party walls. We specify the right product for each surface before we pull the first sheet.

Drywall board types for Ozerna homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Ozerna away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Ozerna surface before we pull the first sheet.

How it works

Simple, clean, on schedule — Drywall Installation in Ozerna Edmonton

Free quote

We come out to your Ozerna Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Ozerna Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Ozerna Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Ozerna Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Ozerna Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Ozerna Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Ozerna Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Ozerna Edmonton

Drywall Installation Ozerna Edmonton: your questions answered

Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Ozerna. In Ozerna, the wall board tucks under the ceiling board to support it. Out of order, Ozerna ceiling joints carry their own weight and crack sooner. In Ozerna, walls wait until the ceiling is boarded.
How do you handle texture matching after drywall installation work in Ozerna in Edmonton?: Texture matching is part of every repair and patch job we do in Ozerna. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
Do you board for legal suites in Ozerna?: Yes, and we know the spec. A legal secondary suite in Ozerna requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Ozerna suites board and pass inspection.
What board do you use on exterior basement walls in Edmonton?: In Ozerna, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Ozerna interior walls get standard 1/2” board. Legal suites in Ozerna take 5/8” Type X on the ceiling and soundproof party walls. Each Ozerna surface gets its board product confirmed at the quote.
For Ozerna exterior basement walls, what board do you use?: In Ozerna, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Ozerna home.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Ozerna Edmonton

Drywall installation hung straight and screwed off right