Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

How do you handle texture matching after drywall installation work in Miller?

Texture matching is part of every repair and patch job we do in Miller. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

How long does drywall installation take in a Miller home?

A standard basement in a Miller home typically takes one to two days to board. New construction or a big reno in Miller runs a longer schedule. The Miller timeline you get at the quote is realistic, not optimistic. In Miller, finishing usually begins the day after boarding wraps.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Miller: the quoted timeline is the real one. The taping crew can usually start the next day.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Miller. In Miller, the wall board tucks under the ceiling board to support it. Out of order, Miller ceiling joints carry their own weight and crack sooner. In Miller, walls wait until the ceiling is boarded.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

Drywall Installation Miller Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

The Miller finish is only as good as the boarding under it. We board Miller level with proper screws, framed seams and tidy cuts around corners and mechanical. Miller is a higher-end Northeast community where boarding quality is expected to be consistent with the quality of the rest of the home. We cover Miller, Balwin, Bannerman, Belmont and the surrounding area, 7 days a week.

Drywall boarding and hanging in Miller — new builds and renovations
Ceiling-then-walls basement boarding across Miller
No rework in Miller: tape-ready boarding when we go
Moisture-resistant board on exterior foundation walls and wet areas
Correct screw pattern throughout Miller — all seams on framing
Basement boarding — ceiling first, walls second
Ready for taping when we leave an Miller job — no rework

Ceilings first, then walls

The order is not arbitrary

Ceiling board goes up first so the wall sheets push up underneath and support its edges.

What it prevents

Doing it the other way leaves the ceiling perimeter unsupported, and in an Miller room that is where the cracking starts. It also gives a tighter joint at the wall-ceiling line, which is the joint people look at most.

Board layout is decided before the first sheet

Where the joints land

On an Miller wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

Why Miller homeowners trust Emplastrum for drywall installation in Edmonton

Board it right for the finish

Behind every Miller taping problem we have fixed was a boarding problem first. We board every Miller job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Miller and Northeast, 7 days a week. For Miller homeowners: free quote, fixed number, backed workmanship. Any issue on an Miller boarding job earns a return trip and a proper fix.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Miller bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Miller, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Types of Drywall Installation work in Miller in Edmonton

New installs, renovation work and repair in Miller

We handle the full range of drywall installation work in Miller — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Miller

Legal suite work in Miller requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Balwin, Bannerman, Belmont — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Balwin, Bannerman, Belmont — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

How it works

Simple, clean, on schedule — Drywall Installation in Miller Edmonton

Free quote

We come out to your Miller Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Miller Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Miller Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Miller Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Miller Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Miller Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Miller Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Miller Edmonton

Drywall Installation Miller Edmonton: your questions answered

Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
How do you handle texture matching after drywall installation work in Miller in Edmonton?: Texture matching is part of every repair and patch job we do in Miller. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
How long does drywall installation take in a Miller home in Edmonton?: A standard basement in a Miller home typically takes one to two days to board. New construction or a big reno in Miller runs a longer schedule. The Miller timeline you get at the quote is realistic, not optimistic. In Miller, finishing usually begins the day after boarding wraps.
How long does drywall installation take in a Edmonton home in Edmonton?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Miller: the quoted timeline is the real one. The taping crew can usually start the next day.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Miller. In Miller, the wall board tucks under the ceiling board to support it. Out of order, Miller ceiling joints carry their own weight and crack sooner. In Miller, walls wait until the ceiling is boarded.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Miller Edmonton

Drywall installation hung straight and screwed off right