For McLeod exterior basement walls, what board do you use?

In McLeod, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your McLeod home.

How long does drywall installation take in an McLeod home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in McLeod are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

How long does drywall installation take in a McLeod home?

A standard basement in a McLeod home typically takes one to two days to board. New construction or a big reno in McLeod runs a longer schedule. The McLeod timeline you get at the quote is realistic, not optimistic. In McLeod, finishing usually begins the day after boarding wraps.

Does McLeod taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in McLeod.

Can the taping crew start right after you board an McLeod home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in McLeod.

What board do you use on McLeod exterior basement walls?

Moisture-resistant board on all McLeod exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your McLeod home.

Drywall Installation McLeod Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

The McLeod finish is only as good as the boarding under it. We board McLeod level with proper screws, framed seams and tidy cuts around corners and mechanical. McLeod is a higher-end Northeast community where boarding quality is expected to be consistent with the quality of the rest of the home. We cover McLeod, Balwin, Bannerman, Belmont and the surrounding area, 7 days a week.

Left ready for taper — no rework needed
McLeod basement development boarded ceiling-first, then walls
Basement development boarding in McLeod — ceiling first, then walls
Fire-rated and soundproof board for McLeod legal-suite separations
Suite separations in McLeod boarded fire-rated and soundproof
Correct screw pattern and every seam on framing in McLeod
Tape-ready McLeod boarding, nothing for the taping crew to fix

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an McLeod room where they will show through the finish.

McLeod drywall in context

About McLeod

Unique to McLeod is the fact that almost all of its residential properties are developed with single detached dwellings.

What we see in McLeod

In McLeod the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our drywall installation process in McLeod in Edmonton, step by step

Ceiling board first — always — in McLeod homes

Every boarding job in McLeod starts with the ceiling. In McLeod we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the McLeod order and the ceiling joints go unsupported and crack. In McLeod, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in McLeod

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In McLeod, every seam lands on framing, never mid-bay. In McLeod, every inside and outside corner is square and clean. In McLeod, board stops clean at window and door frames. When the boarding is done in an McLeod home, every surface is at the right plane and the taping crew can go straight to work.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all McLeod bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In McLeod, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Board layout is decided before the first sheet

Where the joints land

On an McLeod wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote McLeod homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across McLeod and Balwin, Bannerman, Belmont

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout McLeod, Balwin, Bannerman, Belmont and surrounding communities. Call or text ' . emp_phone() . '.

Drywall board types for McLeod homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in McLeod away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every McLeod surface before we pull the first sheet.

How it works

Simple, clean, on schedule — Drywall Installation in Mcleod Edmonton

Free quote

We come out to your Mcleod Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Mcleod Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Mcleod Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Mcleod Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Mcleod Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Mcleod Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Mcleod Edmonton.

Read our reviews on Google

FAQ — Drywall Installation McLeod Edmonton

Drywall Installation McLeod Edmonton: your questions answered

For McLeod exterior basement walls, what board do you use?: In McLeod, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your McLeod home.
How long does drywall installation take in an McLeod home in Edmonton?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in McLeod are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
How long does drywall installation take in a McLeod home in Edmonton?: A standard basement in a McLeod home typically takes one to two days to board. New construction or a big reno in McLeod runs a longer schedule. The McLeod timeline you get at the quote is realistic, not optimistic. In McLeod, finishing usually begins the day after boarding wraps.
Does McLeod taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in McLeod.
Can the taping crew start right after you board an McLeod home?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in McLeod.
What board do you use on McLeod exterior basement walls?: Moisture-resistant board on all McLeod exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your McLeod home.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation McLeod Edmonton

Drywall installation hung straight and screwed off right