How long does drywall installation take in an Mactaggart home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Mactaggart are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

Does Mactaggart taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Mactaggart.

What board do you use for exterior basement walls in Mactaggart?

Every Mactaggart foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Mactaggart interior walls away from moisture take standard 1/2” board. Mactaggart suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Mactaggart surface is set at the on-site quote.

Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Aspen Gardens, Bearspaw, Blue Quill, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

Drywall Installation Mactaggart Edmonton | Board & Tape

Drywall installation in Mactaggart — hung straight, screwed off right

Mactaggart is an Whitemud community, where new builds, basements and renovations need clean drywall hanging, taping and finishing We board, tape, mud and finish to a smooth, paint-ready surface. We cover Mactaggart and every all of Edmonton community, 7 days a week.

Mactaggart coverage — we come to you
Basement boarding — ceiling first, walls second
Mactaggart basement development boarded ceiling-first, then walls
Fire-rated and soundproof board for Mactaggart legal-suite separations
Drywall boarding and hanging — new builds and renovations
Correct screw pattern throughout — all seams on framing
Mactaggart boarding left tape-ready, no rework for the finishers

Our Drywall Installation process in Mactaggart in Edmonton

Assess before we start — always in Mactaggart

Every job in Mactaggart starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Mactaggart

When we leave your Mactaggart home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Mactaggart drywall in context

About Mactaggart

The MacTaggart neighbourhood takes its name from Sandy Auld Mactaggart, a local entrepreneur and philanthropist with provincial, national and international achievements in business, the arts, and education.

What we see in Mactaggart

In Mactaggart the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We confirm what your home actually needs on site, in writing, before anything starts.

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Mactaggart room where they will show through the finish.

Our drywall installation process in Mactaggart in Edmonton, step by step

Ceiling board first — always — in Mactaggart homes

Every boarding job in Mactaggart starts with the ceiling. In Mactaggart we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Mactaggart order and the ceiling joints go unsupported and crack. In Mactaggart, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Mactaggart

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Mactaggart, every seam lands on framing, never mid-bay. In Mactaggart, every inside and outside corner is square and clean. In Mactaggart, board stops clean at window and door frames. When the boarding is done in an Mactaggart home, every surface is at the right plane and the taping crew can go straight to work.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Mactaggart wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Mactaggart jobs. We hold Mactaggart board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Mactaggart bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Mactaggart, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Aspen Gardens, Bearspaw, Blue Quill and Edmonton, 7 days a week — every established and newer Edmonton community from Aspen Gardens, Bearspaw, Blue Quill to Aspen Gardens, Bearspaw, Blue Quill. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

How it works

Simple, clean, on schedule — Drywall Installation in Mactaggart Edmonton

Free quote

We come out to your Mactaggart Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Mactaggart Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Mactaggart Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Mactaggart Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Mactaggart Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Mactaggart Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Mactaggart Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Mactaggart Edmonton

Drywall Installation Mactaggart Edmonton: your questions answered

Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
How long does drywall installation take in an Mactaggart home in Edmonton?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Mactaggart are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
Does Mactaggart taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Mactaggart.
What board do you use for exterior basement walls in Mactaggart?: Every Mactaggart foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Mactaggart interior walls away from moisture take standard 1/2” board. Mactaggart suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Mactaggart surface is set at the on-site quote.
Do you cover all of Edmonton for drywall installation in Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Aspen Gardens, Bearspaw, Blue Quill, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Mactaggart Edmonton

Drywall installation in Mactaggart — hung straight, screwed off right