Do you stand behind your installation work in Lymburn?

Yes. Before leaving Lymburn, we walk the boarding together and fix anything not right.

Can the taping crew start right after you board an Lymburn home?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Lymburn.

Do you do drywall installation in Lymburn?

Yes — Lymburn is part of our regular service area, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.

What board do you use for exterior basement walls in Lymburn?

Every Lymburn foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Lymburn interior walls away from moisture take standard 1/2” board. Lymburn suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Lymburn surface is set at the on-site quote.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Drywall Installation Lymburn Edmonton | Board & Tape

Drywall installation in Lymburn, hung straight and screwed off right

In Lymburn, the finish rides on the install — seams on framing, right screw pattern, board plumb pre-mud. In Lymburn we board new builds, basements and renovations the way a finishing specialist wants it boarded. Lymburn is this established West Edmonton community where reno, repair and ceiling drywall are common, so the installation work here is usually settling cracks, nail pops and tired texture. We cover Lymburn, Aldergrove, Belmead, Callingwood North and West Edmonton, 7 days a week.

Drywall boarding in Lymburn — new builds and renovations
Lymburn legal-suite separations get fire-rated and soundproof board
Lymburn boarding left tape-ready, no rework for the finishers
Suite separations in Lymburn boarded fire-rated and soundproof
Right screw pattern, all seams landed on framing in Lymburn
Exterior and wet-area Lymburn walls boarded moisture-resistant
Drywall boarding and hanging — new builds and renovations

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Lymburn room where they will show through the finish.

Lymburn drywall in context

About Lymburn

Lymburn (Attorney General from 1926 to 1935), one of the parks is named after Monsignor Walter Fitzgerald.

What we see in Lymburn

In Lymburn the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our drywall installation process in Lymburn in Edmonton, step by step

Ceiling board first — always — in Lymburn homes

Every boarding job in Lymburn starts with the ceiling. In Lymburn we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Lymburn order and the ceiling joints go unsupported and crack. In Lymburn, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Lymburn

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Lymburn, every seam lands on framing, never mid-bay. In Lymburn, every inside and outside corner is square and clean. In Lymburn, board stops clean at window and door frames. When the boarding is done in an Lymburn home, every surface is at the right plane and the taping crew can go straight to work.

What affects the cost of drywall installation in Lymburn in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Lymburn comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Lymburn

The work here usually calls for settling cracks, nail pops and tired texture. The Lymburn quote maps each surface to its correct board — no inspection surprises.

Ceilings first, then walls

The order is not arbitrary

Ceiling board goes up first so the wall sheets push up underneath and support its edges.

What it prevents

Doing it the other way leaves the ceiling perimeter unsupported, and in an Lymburn room that is where the cracking starts. It also gives a tighter joint at the wall-ceiling line, which is the joint people look at most.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Lymburn wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Lymburn jobs. We hold Lymburn board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Drywall board types for Lymburn homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Lymburn away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Lymburn surface before we pull the first sheet.

How it works

Simple, clean, on schedule — Drywall Installation in Lymburn Edmonton

Free quote

We come out to your Lymburn Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Lymburn Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Lymburn Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Lymburn Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Lymburn Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Lymburn Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Lymburn Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Lymburn Edmonton

Drywall Installation Lymburn Edmonton: your questions answered

Do you stand behind your installation work in Lymburn?: Yes. Before leaving Lymburn, we walk the boarding together and fix anything not right.
Can the taping crew start right after you board an Lymburn home?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Lymburn.
Do you do drywall installation in Lymburn in Edmonton?: Yes — Lymburn is part of our regular service area, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
What board do you use for exterior basement walls in Lymburn?: Every Lymburn foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Lymburn interior walls away from moisture take standard 1/2” board. Lymburn suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Lymburn surface is set at the on-site quote.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Lymburn Edmonton

Drywall installation in Lymburn, hung straight and screwed off right