Is drywall installation in Lansdowne a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Do you board for legal suites in Lansdowne?

Yes, and we know the spec. A legal secondary suite in Lansdowne requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Lansdowne suites board and pass inspection.

How long does drywall installation take in a Lansdowne home?

A standard basement in a Lansdowne home typically takes one to two days to board. New construction or a big reno in Lansdowne runs a longer schedule. The Lansdowne timeline you get at the quote is realistic, not optimistic. In Lansdowne, finishing usually begins the day after boarding wraps.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

Drywall Installation Lansdowne Edmonton | Board & Tape

Drywall installation in Lansdowne, hung straight and screwed off right

In Lansdowne, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Lansdowne standard. Lansdowne is one of Edmonton’s oldest communities. Renovation boarding in homes from the 1950s, 1960s and 1970s is the most common installation work here. We cover Lansdowne, Allendale, Argyll, Belgravia and the surrounding area, 7 days a week.

Lansdowne screw spacing to spec, seams landed on framing
STC soundproof board on party walls for legal suites
Room additions, garage conversions and flex room boarding
Lansdowne board hung on the correct screw pattern, seams on framing
Ready for taping when we leave an Lansdowne job — no rework
Drywall boarding and hanging — new builds and renovations
Ceiling-first, then-walls basement boarding in Lansdowne

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Lansdowne suite party walls. We specify the right product for each surface before we pull the first sheet.

Lansdowne drywall in context

About Lansdowne

Residents of Lansdowne enjoy a quiet pastoral atmosphere and the opportunity to view the rural, agricultural setting of the University of Alberta Farm from the bicycle path through the eastern portion of the farm.

What we see in Lansdowne

In Lansdowne the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Lansdowne room where they will show through the finish.

Drywall installation work we do in Lansdowne in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Lansdowne, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Lansdowne wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Lansdowne jobs. We hold Lansdowne board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Board layout is decided before the first sheet

Where the joints land

On an Lansdowne wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

Our drywall installation process in Lansdowne in Edmonton, step by step

Ceiling board first — always — in Lansdowne homes

Every boarding job in Lansdowne starts with the ceiling. In Lansdowne we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Lansdowne order and the ceiling joints go unsupported and crack. In Lansdowne, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Lansdowne

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Lansdowne, every seam lands on framing, never mid-bay. In Lansdowne, every inside and outside corner is square and clean. In Lansdowne, board stops clean at window and door frames. When the boarding is done in an Lansdowne home, every surface is at the right plane and the taping crew can go straight to work.

How it works

Simple, clean, on schedule — Drywall Installation in Lansdowne Edmonton

Free quote

We come out to your Lansdowne Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Lansdowne Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Lansdowne Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Lansdowne Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Lansdowne Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Lansdowne Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Lansdowne Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Lansdowne Edmonton

Drywall Installation Lansdowne Edmonton: your questions answered

Is drywall installation in Lansdowne a fixed price in Edmonton?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you board for legal suites in Lansdowne?: Yes, and we know the spec. A legal secondary suite in Lansdowne requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Lansdowne suites board and pass inspection.
How long does drywall installation take in a Lansdowne home in Edmonton?: A standard basement in a Lansdowne home typically takes one to two days to board. New construction or a big reno in Lansdowne runs a longer schedule. The Lansdowne timeline you get at the quote is realistic, not optimistic. In Lansdowne, finishing usually begins the day after boarding wraps.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Lansdowne Edmonton

Drywall installation in Lansdowne, hung straight and screwed off right