What board do you use on Hillview exterior basement walls?

Moisture-resistant board on all Hillview exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Hillview home.

Why does the ceiling get boarded first?

So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.

How long does drywall installation take in an Hillview home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Hillview are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

For Hillview exterior basement walls, what board do you use?

In Hillview, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Hillview home.

Do you board for legal suites in Hillview?

Yes, and we know the spec. A legal secondary suite in Hillview requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Hillview suites board and pass inspection.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Drywall Installation Hillview Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

In Hillview, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Hillview standard. Hillview is one of Edmonton’s oldest communities. Renovation boarding in homes from the 1950s, 1960s and 1970s is the most common installation work here. We cover Hillview, Bisset, Crawford Plains, Daly Grove and the surrounding area, 7 days a week.

Drywall boarding and hanging in Hillview — new builds and renovations
Fire-rated plus soundproof board on Hillview suite separations
Hillview exterior walls and wet areas get moisture-resistant board
Bulkheads, soffits, archways and ceiling work
Correct screw pattern throughout Hillview — all seams on framing
Hillview board hung on the correct screw pattern, seams on framing
Ceiling-first, then-walls basement boarding in Hillview

Board layout is decided before the first sheet

Where the joints land

On an Hillview wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

Hillview drywall in context

About Hillview

Hillview is located immediately to the north of the Grey Nuns Community Hospital.

What we see in Hillview

In Hillview the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Hillview homeowners trust Emplastrum for drywall installation in Edmonton

Board it right for the finish

Behind every Hillview taping problem we have fixed was a boarding problem first. We board every Hillview job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Hillview and Mill Woods and Meadows, 7 days a week. For Hillview homeowners: free quote, fixed number, backed workmanship. Any issue on an Hillview boarding job earns a return trip and a proper fix.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Bisset, Crawford Plains, Daly Grove and Edmonton, 7 days a week — every established and newer Edmonton community from Bisset, Crawford Plains, Daly Grove to Bisset, Crawford Plains, Daly Grove. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Hillview homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Hillview and Bisset, Crawford Plains, Daly Grove

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Hillview, Bisset, Crawford Plains, Daly Grove and surrounding communities. Call or text ' . emp_phone() . '.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Hillview bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Hillview, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Types of Drywall Installation work in Hillview in Edmonton

New installs, renovation work and repair in Hillview

We handle the full range of drywall installation work in Hillview — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Hillview

Legal suite work in Hillview requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

How it works

Simple, clean, on schedule — Drywall Installation in Hillview Edmonton

Free quote

We come out to your Hillview Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Hillview Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Hillview Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hillview Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Hillview Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Hillview Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Hillview Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Hillview Edmonton

Drywall Installation Hillview Edmonton: your questions answered

What board do you use on Hillview exterior basement walls?: Moisture-resistant board on all Hillview exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Hillview home.
Why does the ceiling get boarded first?: So the wall sheets push up underneath and support the ceiling edges. The other way leaves the ceiling perimeter unsupported, which is where cracking starts, and it gives a tighter joint at the wall-ceiling line.
How long does drywall installation take in an Hillview home in Edmonton?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Hillview are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
For Hillview exterior basement walls, what board do you use?: In Hillview, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Hillview home.
Do you board for legal suites in Hillview?: Yes, and we know the spec. A legal secondary suite in Hillview requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Hillview suites board and pass inspection.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Hillview Edmonton

Drywall installation hung straight and screwed off right