Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Hawks Ridge. In Hawks Ridge, the wall board tucks under the ceiling board to support it. Out of order, Hawks Ridge ceiling joints carry their own weight and crack sooner. In Hawks Ridge, walls wait until the ceiling is boarded.

How do you handle texture matching after drywall installation work in Hawks Ridge?

Texture matching is part of every repair and patch job we do in Hawks Ridge. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Do you stand behind your installation work in Hawks Ridge?

Yes. Before leaving Hawks Ridge, we walk the boarding together and fix anything not right.

What board do you use on exterior basement walls in Edmonton?

In Hawks Ridge, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Hawks Ridge interior walls get standard 1/2” board. Legal suites in Hawks Ridge take 5/8” Type X on the ceiling and soundproof party walls. Each Hawks Ridge surface gets its board product confirmed at the quote.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Drywall Installation Hawks Ridge Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

Good drywall installation is what makes a good Hawks Ridge finish possible. We hang Hawks Ridge board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Hawks Ridge homes from the late 1980s and 1990s are at the age where renovation room additions and water damage reboarding are the most common boarding calls. We cover Hawks Ridge, Breckenridge Greens, Edgemont, Glastonbury and the surrounding area, 7 days a week.

Fire-rated plus soundproof board on Hawks Ridge suite separations
Hawks Ridge screw spacing to spec, seams landed on framing
No rework in Hawks Ridge: tape-ready boarding when we go
Hawks Ridge boarding left tape-ready, no rework for the finishers
In Hawks Ridge, correct screw spacing and seams on framing throughout
Bulkheads, soffits, archways and vaulted ceiling work
Left ready for taper — no rework needed

Drywall board types for Hawks Ridge homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Hawks Ridge away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Hawks Ridge surface before we pull the first sheet.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Hawks Ridge homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Hawks Ridge and Breckenridge Greens, Edgemont, Glastonbury

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Hawks Ridge, Breckenridge Greens, Edgemont, Glastonbury and surrounding communities. Call or text ' . emp_phone() . '.

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Hawks Ridge house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

Board layout is decided before the first sheet

Where the joints land

On an Hawks Ridge wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

Why Hawks Ridge homeowners trust Emplastrum for drywall installation in Edmonton

Board it right for the finish

Behind every Hawks Ridge taping problem we have fixed was a boarding problem first. We board every Hawks Ridge job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Hawks Ridge and West Henday, 7 days a week. For Hawks Ridge homeowners: free quote, fixed number, backed workmanship. Any issue on an Hawks Ridge boarding job earns a return trip and a proper fix.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Breckenridge Greens, Edgemont, Glastonbury — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Breckenridge Greens, Edgemont, Glastonbury — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

How it works

Simple, clean, on schedule — Drywall Installation in Hawks Ridge Edmonton

Free quote

We come out to your Hawks Ridge Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Hawks Ridge Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Hawks Ridge Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Hawks Ridge Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Hawks Ridge Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Hawks Ridge Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Hawks Ridge Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Hawks Ridge Edmonton

Drywall Installation Hawks Ridge Edmonton: your questions answered

Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Hawks Ridge. In Hawks Ridge, the wall board tucks under the ceiling board to support it. Out of order, Hawks Ridge ceiling joints carry their own weight and crack sooner. In Hawks Ridge, walls wait until the ceiling is boarded.
How do you handle texture matching after drywall installation work in Hawks Ridge in Edmonton?: Texture matching is part of every repair and patch job we do in Hawks Ridge. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
Do you stand behind your installation work in Hawks Ridge?: Yes. Before leaving Hawks Ridge, we walk the boarding together and fix anything not right.
What board do you use on exterior basement walls in Edmonton?: In Hawks Ridge, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Hawks Ridge interior walls get standard 1/2” board. Legal suites in Hawks Ridge take 5/8” Type X on the ceiling and soundproof party walls. Each Hawks Ridge surface gets its board product confirmed at the quote.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Hawks Ridge Edmonton

Drywall installation hung straight and screwed off right