Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Do you do drywall installation in Gariepy?

Yes — Gariepy is part of our regular service area, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.

Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Aldergrove, Belmead, Callingwood North, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

Do you stand behind your installation work in Gariepy?

Yes. Before leaving Gariepy, we walk the boarding together and fix anything not right.

Drywall Installation Gariepy Edmonton | Board & Tape

Drywall installation in Gariepy, hung straight and screwed off right

A good Gariepy finish starts with good boarding. In Gariepy the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Gariepy is one of West Edmonton’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Gariepy, East Hills, Applewood and Edmonton and the surrounding area, 7 days a week.

Ceiling-then-walls basement boarding across Gariepy
Renovation reboarding — removing old board, installing new to current spec
Room additions, garage conversions and flex room boarding
Gariepy legal-suite separations get fire-rated and soundproof board
No rework in Gariepy — the board is ready for tape when we go
Bulkheads, soffits, archways and vaulted ceiling work
Gariepy boarding left tape-ready, no rework for the finishers

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Gariepy house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

Gariepy drywall in context

About Gariepy

This area was named for Joseph Hormisdas Gariepy, an early pioneer merchant.

What we see in Gariepy

In Gariepy the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Aldergrove, Belmead, Callingwood North — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Aldergrove, Belmead, Callingwood North — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Gariepy homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Gariepy and Aldergrove, Belmead, Callingwood North

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Gariepy, Aldergrove, Belmead, Callingwood North and surrounding communities. Call or text ' . emp_phone() . '.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Gariepy wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Gariepy jobs. We hold Gariepy board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Our Gariepy drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Gariepy starts with the ceiling, because the wall board butts up under it and helps carry it. In Gariepy, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Gariepy, completed boarding hands straight to taping with nothing to fix.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Gariepy bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Gariepy, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

How it works

Simple, clean, on schedule — Drywall Installation in Gariepy Edmonton

Free quote

We come out to your Gariepy Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Gariepy Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Gariepy Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Gariepy Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Gariepy Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Gariepy Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Gariepy Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Gariepy Edmonton

Drywall Installation Gariepy Edmonton: your questions answered

Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
Do you do drywall installation in Gariepy in Edmonton?: Yes — Gariepy is part of our regular service area, and we are usually booked within the week. We also cover Aldergrove, Belmead, Callingwood North and West Edmonton.
Do you cover all of Edmonton for drywall installation in Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Aldergrove, Belmead, Callingwood North, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
Do you stand behind your installation work in Gariepy?: Yes. Before leaving Gariepy, we walk the boarding together and fix anything not right.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Gariepy Edmonton

Drywall installation in Gariepy, hung straight and screwed off right