Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

What board do you use for exterior basement walls in Canora?

Every Canora foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Canora interior walls away from moisture take standard 1/2” board. Canora suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Canora surface is set at the on-site quote.

Is drywall installation in Canora a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Do you board for legal suites in Canora?

Yes, and we know the spec. A legal secondary suite in Canora requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Canora suites board and pass inspection.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Canora. In Canora, the wall board tucks under the ceiling board to support it. Out of order, Canora ceiling joints carry their own weight and crack sooner. In Canora, walls wait until the ceiling is boarded.

Drywall Installation Canora Edmonton | Board & Tape

Drywall installation in Canora — right board, right spec, ready to tape

Good drywall installation is what makes a good Canora finish possible — seams on framing, the right screw pattern, board plumb before a single coat of mud goes on. In Canora we board new builds, basements and renovations the way a finishing specialist wants it boarded. Canora is an older Jasper Place community where settling cracks, aging texture and the occasional plaster repair come up, so the installation work here is usually settling cracks, aging stipple and the odd plaster repair. We cover Canora, Britannia Youngstown, Crestwood, Elmwood and Jasper Place, 7 days a week.

No rework in Canora: tape-ready boarding when we go
Fire-rated 5/8” Type X on suite ceilings where required
Room additions, garage conversions and flex room boarding
Left ready for taper — no rework needed
In Canora, correct screw spacing and seams on framing throughout
Canora boarding left tape-ready, no rework for the finishers
Drywall boarding and hanging — new builds and renovations

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Canora room where they will show through the finish.

Canora drywall in context

About Canora

The Canora school was opened in 1949, and the neighbourhood became known by the school's name.

What we see in Canora

In Canora the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Drywall installation work we do in Canora in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Canora, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Canora suite party walls. We specify the right product for each surface before we pull the first sheet.

Our Canora drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Canora starts with the ceiling, because the wall board butts up under it and helps carry it. In Canora, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Canora, completed boarding hands straight to taping with nothing to fix.

Our Drywall Installation process in Canora in Edmonton

Assess before we start — always in Canora

Every job in Canora starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Canora

When we leave your Canora home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Canora wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Canora jobs. We hold Canora board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

How it works

Simple, clean, on schedule — Drywall Installation in Canora Edmonton

Free quote

We come out to your Canora Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Canora Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Canora Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Canora Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Canora Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Canora Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Canora Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Canora Edmonton

Drywall Installation Canora Edmonton: your questions answered

Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
What board do you use for exterior basement walls in Canora?: Every Canora foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Canora interior walls away from moisture take standard 1/2” board. Canora suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Canora surface is set at the on-site quote.
Is drywall installation in Canora a fixed price in Edmonton?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.
Do you board for legal suites in Canora?: Yes, and we know the spec. A legal secondary suite in Canora requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Canora suites board and pass inspection.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Canora. In Canora, the wall board tucks under the ceiling board to support it. Out of order, Canora ceiling joints carry their own weight and crack sooner. In Canora, walls wait until the ceiling is boarded.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Canora Edmonton

Drywall installation in Canora — right board, right spec, ready to tape