What board do you use for exterior basement walls in Bonnie Doon?

Every Bonnie Doon foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Bonnie Doon interior walls away from moisture take standard 1/2” board. Bonnie Doon suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Bonnie Doon surface is set at the on-site quote.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Do you stand behind your installation work in Bonnie Doon?

Yes. Before leaving Bonnie Doon, we walk the boarding together and fix anything not right.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

What board do you use on exterior basement walls in Edmonton?

In Bonnie Doon, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Bonnie Doon interior walls get standard 1/2” board. Legal suites in Bonnie Doon take 5/8” Type X on the ceiling and soundproof party walls. Each Bonnie Doon surface gets its board product confirmed at the quote.

How long does drywall installation take in a Bonnie Doon home?

A standard basement in a Bonnie Doon home typically takes one to two days to board. New construction or a big reno in Bonnie Doon runs a longer schedule. The Bonnie Doon timeline you get at the quote is realistic, not optimistic. In Bonnie Doon, finishing usually begins the day after boarding wraps.

Drywall Installation Bonnie Doon Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

In Bonnie Doon, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Bonnie Doon standard. Bonnie Doon is one of Edmonton’s oldest communities. Renovation boarding in homes from the 1950s, 1960s and 1970s is the most common installation work here. We cover Bonnie Doon, Avonmore, Capilano, Cloverdale and the surrounding area, 7 days a week.

Bonnie Doon coverage — we come to you
Basement boarding — ceiling first, walls second
Bonnie Doon legal-suite separations get fire-rated and soundproof board
Correct screw pattern throughout Bonnie Doon — all seams on framing
Ready for taping when we leave an Bonnie Doon job — no rework
Drywall boarding and hanging — new builds and renovations
Bulkheads, soffits, archways and vaulted ceiling work

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Avonmore, Capilano, Cloverdale and Edmonton, 7 days a week — every established and newer Edmonton community from Avonmore, Capilano, Cloverdale to Avonmore, Capilano, Cloverdale. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Bonnie Doon drywall in context

About Bonnie Doon

At the turn of the 20th century, the cities of Edmonton and Strathcona were engaged in an intense rivalry to attract growth.

What we see in Bonnie Doon

In Bonnie Doon the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our Drywall Installation process in Bonnie Doon in Edmonton

Assess before we start — always in Bonnie Doon

Every job in Bonnie Doon starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Bonnie Doon

When we leave your Bonnie Doon home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Why Bonnie Doon homeowners trust Emplastrum for drywall installation in Edmonton

Board it right for the finish

Behind every Bonnie Doon taping problem we have fixed was a boarding problem first. We board every Bonnie Doon job the way we would want it boarded before we tape it.

Fixed price, same-day reply

We install drywall across Bonnie Doon and Southeast, 7 days a week. For Bonnie Doon homeowners: free quote, fixed number, backed workmanship. Any issue on an Bonnie Doon boarding job earns a return trip and a proper fix.

Drywall board types used in Bonnie Doon homes

Standard 1/2” drywall — the right choice for most Bonnie Doon walls

Standard 1/2” drywall is correct for interior walls and ceilings in Bonnie Doon homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Bonnie Doon walls and ceilings should be. Most interior walls and ceilings in Bonnie Doon homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Bonnie Doon

Exterior basement walls in Bonnie Doon homes need moisture-resistant board. In Bonnie Doon, every bathroom and laundry wall takes moisture-resistant board. An Bonnie Doon suite ceiling must carry 5/8” Type X fire-rated board. In Bonnie Doon, the suite-to-main party wall takes STC soundproof board. The right board per Bonnie Doon surface is set at the quote for a clean inspection.

Drywall board types for Bonnie Doon homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Bonnie Doon away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Bonnie Doon surface before we pull the first sheet.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Bonnie Doon wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Bonnie Doon jobs. We hold Bonnie Doon board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

How it works

Simple, clean, on schedule — Drywall Installation in Bonnie Doon Edmonton

Free quote

We come out to your Bonnie Doon Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Bonnie Doon Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Bonnie Doon Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Bonnie Doon Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Bonnie Doon Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Bonnie Doon Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Bonnie Doon Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Bonnie Doon Edmonton

Drywall Installation Bonnie Doon Edmonton: your questions answered

What board do you use for exterior basement walls in Bonnie Doon?: Every Bonnie Doon foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Bonnie Doon interior walls away from moisture take standard 1/2” board. Bonnie Doon suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Bonnie Doon surface is set at the on-site quote.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you stand behind your installation work in Bonnie Doon?: Yes. Before leaving Bonnie Doon, we walk the boarding together and fix anything not right.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
What board do you use on exterior basement walls in Edmonton?: In Bonnie Doon, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Bonnie Doon interior walls get standard 1/2” board. Legal suites in Bonnie Doon take 5/8” Type X on the ceiling and soundproof party walls. Each Bonnie Doon surface gets its board product confirmed at the quote.
How long does drywall installation take in a Bonnie Doon home in Edmonton?: A standard basement in a Bonnie Doon home typically takes one to two days to board. New construction or a big reno in Bonnie Doon runs a longer schedule. The Bonnie Doon timeline you get at the quote is realistic, not optimistic. In Bonnie Doon, finishing usually begins the day after boarding wraps.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Bonnie Doon Edmonton

Drywall installation hung straight and screwed off right