Do you board for legal suites in Blackburne?

Yes, and we know the spec. A legal secondary suite in Blackburne requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Blackburne suites board and pass inspection.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

How long does drywall installation take in a Blackburne home?

A standard basement in a Blackburne home typically takes one to two days to board. New construction or a big reno in Blackburne runs a longer schedule. The Blackburne timeline you get at the quote is realistic, not optimistic. In Blackburne, finishing usually begins the day after boarding wraps.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

What board do you use for exterior basement walls in Blackburne?

Every Blackburne foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Blackburne interior walls away from moisture take standard 1/2” board. Blackburne suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Blackburne surface is set at the on-site quote.

Drywall Installation Blackburne Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

In Blackburne, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Blackburne standard. Blackburne is one of Edmonton’s oldest communities. Renovation boarding in homes from the 1950s, 1960s and 1970s is the most common installation work here. We cover Blackburne, Allard, Ambleside, Blackmud Creek and the surrounding area, 7 days a week.

Fire-rated plus soundproof board on Blackburne suite separations
Blackburne board hung on the correct screw pattern, seams on framing
Bulkheads, soffits, archways and ceiling work
Ready for taping when we leave an Blackburne job — no rework
Correct screw pattern throughout Blackburne — all seams on framing
Correct screw pattern throughout — all seams on framing
Ceiling-first, then-walls basement boarding in Blackburne

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Allard, Ambleside, Blackmud Creek and Edmonton, 7 days a week — every established and newer Edmonton community from Allard, Ambleside, Blackmud Creek to Allard, Ambleside, Blackmud Creek. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Blackburne drywall in context

About Blackburne

The neighbourhood name "Blackburne" was derived from Blackmud Creek, which runs across the southern edge of the community, and in reference to "burne" which is an old English word for stream or river.

What we see in Blackburne

In Blackburne the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our drywall installation process in Blackburne in Edmonton, step by step

Ceiling board first — always — in Blackburne homes

Every boarding job in Blackburne starts with the ceiling. In Blackburne we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Blackburne order and the ceiling joints go unsupported and crack. In Blackburne, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Blackburne

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Blackburne, every seam lands on framing, never mid-bay. In Blackburne, every inside and outside corner is square and clean. In Blackburne, board stops clean at window and door frames. When the boarding is done in an Blackburne home, every surface is at the right plane and the taping crew can go straight to work.

Handling the sheets without damaging them

Damage happens before it goes up

Board stored on edge, dragged, or left where it can take moisture arrives at the wall already compromised, and a crushed edge or a damp corner never finishes well.

On our sites

Stacked flat and dry, carried rather than dragged, and damaged sheets set aside for offcuts rather than hung in an Blackburne room where they will show through the finish.

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Allard, Ambleside, Blackmud Creek — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Allard, Ambleside, Blackmud Creek — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

Types of Drywall Installation work in Blackburne in Edmonton

New installs, renovation work and repair in Blackburne

We handle the full range of drywall installation work in Blackburne — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Blackburne

Legal suite work in Blackburne requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

How it works

Simple, clean, on schedule — Drywall Installation in Blackburne Edmonton

Free quote

We come out to your Blackburne Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Blackburne Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Blackburne Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Blackburne Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Blackburne Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Blackburne Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Blackburne Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Blackburne Edmonton

Drywall Installation Blackburne Edmonton: your questions answered

Do you board for legal suites in Blackburne?: Yes, and we know the spec. A legal secondary suite in Blackburne requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC soundproof board on the party walls. Moisture-resistant in all wet areas. That spec is how Blackburne suites board and pass inspection.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
How long does drywall installation take in a Blackburne home in Edmonton?: A standard basement in a Blackburne home typically takes one to two days to board. New construction or a big reno in Blackburne runs a longer schedule. The Blackburne timeline you get at the quote is realistic, not optimistic. In Blackburne, finishing usually begins the day after boarding wraps.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
What board do you use for exterior basement walls in Blackburne?: Every Blackburne foundation-facing wall, plus plumbing and laundry, gets moisture-resistant board. Blackburne interior walls away from moisture take standard 1/2” board. Blackburne suite spec: Type X 5/8” fire-rated ceiling, soundproof party walls. The correct board per Blackburne surface is set at the on-site quote.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Blackburne Edmonton

Drywall installation hung straight and screwed off right