Do you stand behind your installation work in Bisset?

Yes. Before leaving Bisset, we walk the boarding together and fix anything not right.

Do you do drywall installation in Bisset?

Yes — Bisset is part of our regular service area, and we are usually booked within the week. We also cover Crawford Plains, Daly Grove, Ekota and Mill Woods and Meadows.

Do you hang the ceiling board before the walls?

Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.

Do you serve Bisset on weekends?

Yes — we cover Bisset and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Bisset. In Bisset, the wall board tucks under the ceiling board to support it. Out of order, Bisset ceiling joints carry their own weight and crack sooner. In Bisset, walls wait until the ceiling is boarded.

Does Bisset taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Bisset.

Drywall Installation Bisset Edmonton | Board & Tape

Drywall installation in Bisset — right board, right spec, ready to tape

In Bisset, the finish rides on the install — seams on framing, right screw pattern, board plumb pre-mud. In Bisset we board new builds, basements and renovations the way a finishing specialist wants it boarded. Bisset is this established Mill Woods and Meadows community where reno, repair and ceiling drywall are common, so the installation work here is usually settling cracks, nail pops and tired texture. We cover Bisset, Crawford Plains, Daly Grove, Ekota and Mill Woods and Meadows, 7 days a week.

Moisture-resistant board on exterior foundation walls and wet areas
Fire-rated 5/8” Type X on suite ceilings where required
Room additions, garage conversions and flex room boarding
Drywall boarding in Bisset — new builds and renovations
Bulkheads, soffits, archways and vaulted ceiling work
Bisset boarding left tape-ready, no rework for the finishers
Basement development boarding in Bisset — ceiling first, then walls

Drywall board types for Bisset homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Bisset away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Bisset surface before we pull the first sheet.

Bisset drywall in context

About Bisset

Bisset is named for Judge Athelstan Bisset, Q.C.

What we see in Bisset

In Bisset the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Our drywall installation process in Bisset in Edmonton, step by step

Ceiling board first — always — in Bisset homes

Every boarding job in Bisset starts with the ceiling. In Bisset we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Bisset order and the ceiling joints go unsupported and crack. In Bisset, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Bisset

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Bisset, every seam lands on framing, never mid-bay. In Bisset, every inside and outside corner is square and clean. In Bisset, board stops clean at window and door frames. When the boarding is done in an Bisset home, every surface is at the right plane and the taping crew can go straight to work.

Gapping at the floor and around openings

Board should not touch

A small gap at the slab or subfloor keeps board from wicking moisture and gives the building room to move.

Around windows and doors

Joints are kept away from the corners of openings, because a joint that lines up with a corner is exactly where an Bisset house concentrates movement and where cracks appear first. It costs an offcut and saves a callback.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Bisset bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Bisset, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Drywall installation work we do in Bisset in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Bisset, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Drywall board types for Edmonton homes

Standard 1/2” drywall — the right choice for most Edmonton walls

Standard 1/2” drywall is correct for interior walls and ceilings in Edmonton homes away from moisture exposure. It is the most common board we install and finishes the same as the rest of the house. Most interior walls and ceilings in Edmonton homes use standard board.

Moisture-resistant, fire-rated and soundproof — where the spec matters

Exterior basement walls need moisture-resistant board even with a vapour barrier. Bathroom and laundry walls need moisture-resistant. Legal suite ceilings require 5/8” Type X fire-rated. STC soundproof board goes on Bisset suite party walls. We specify the right product for each surface before we pull the first sheet.

How it works

Simple, clean, on schedule — Drywall Installation in Bisset Edmonton

Free quote

We come out to your Bisset Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Bisset Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Bisset Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Bisset Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Bisset Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Bisset Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Bisset Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Bisset Edmonton

Drywall Installation Bisset Edmonton: your questions answered

Do you stand behind your installation work in Bisset?: Yes. Before leaving Bisset, we walk the boarding together and fix anything not right.
Do you do drywall installation in Bisset in Edmonton?: Yes — Bisset is part of our regular service area, and we are usually booked within the week. We also cover Crawford Plains, Daly Grove, Ekota and Mill Woods and Meadows.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
Do you serve Bisset on weekends?: Yes — we cover Bisset and surrounding communities seven days a week. Call or text ' . emp_phone() . ' for a same-day reply.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Bisset. In Bisset, the wall board tucks under the ceiling board to support it. Out of order, Bisset ceiling joints carry their own weight and crack sooner. In Bisset, walls wait until the ceiling is boarded.
Does Bisset taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Bisset.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Bisset Edmonton

Drywall installation in Bisset — right board, right spec, ready to tape