What board do you use on Argyll exterior basement walls?

Moisture-resistant board on all Argyll exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Argyll home.

Do you board legal suites to spec?

Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.

How long does drywall installation take in a Edmonton home?

A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Argyll: the quoted timeline is the real one. The taping crew can usually start the next day.

For Argyll exterior basement walls, what board do you use?

In Argyll, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Argyll home.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

Is drywall installation in Argyll a fixed price?

Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Drywall Installation Argyll Edmonton | Board & Tape

Drywall installation in Argyll — hung straight, screwed off right

Good drywall installation is what makes a good Argyll finish possible. We hang Argyll board level, use the correct screw pattern, land all seams on framing and cut around mechanical and corners cleanly. Argyll homes from the late 1980s and 1990s are at the age where renovation room additions and water damage reboarding are the most common boarding calls. We cover Argyll, Allendale, Belgravia, CPR Irvine and the surrounding area, 7 days a week.

Fire-rated plus soundproof board on Argyll suite separations
Renovation reboarding — removing old board, installing new to current spec
Argyll exterior walls and wet areas get moisture-resistant board
Moisture-resistant board on Argyll exterior walls and wet areas
Bulkheads, soffits, archways and ceiling work
Correct screw pattern throughout Argyll — all seams on framing
In Argyll, correct screw spacing and seams on framing throughout

Ceilings first, then walls

The order is not arbitrary

Ceiling board goes up first so the wall sheets push up underneath and support its edges.

What it prevents

Doing it the other way leaves the ceiling perimeter unsupported, and in an Argyll room that is where the cracking starts. It also gives a tighter joint at the wall-ceiling line, which is the joint people look at most.

Argyll drywall in context

About Argyll

At the turn of the 20th Century, Argyll was part of a half-section of land owned by J.

What we see in Argyll

In Argyll the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of drywall installation in Argyll in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Argyll comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Argyll

The work here usually calls for settling cracks, nail pops and tired texture. The Argyll quote maps each surface to its correct board — no inspection surprises.

Drywall installation work we do in Argyll in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Argyll, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Our drywall installation process in Argyll in Edmonton, step by step

Ceiling board first — always — in Argyll homes

Every boarding job in Argyll starts with the ceiling. In Argyll we board ceilings first — the wall board tucks under and helps carry the ceiling. Skip the Argyll order and the ceiling joints go unsupported and crack. In Argyll, walls wait until the ceiling is boarded. It is a small thing that makes a significant difference in long-term performance.

Wall boarding, screw pattern and joint placement in Argyll

Wall board goes up with the correct screw pattern — every 12 inches on the field, every 8 inches at the perimeter. In Argyll, every seam lands on framing, never mid-bay. In Argyll, every inside and outside corner is square and clean. In Argyll, board stops clean at window and door frames. When the boarding is done in an Argyll home, every surface is at the right plane and the taping crew can go straight to work.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Allendale, Belgravia, CPR Irvine and Edmonton, 7 days a week — every established and newer Edmonton community from Allendale, Belgravia, CPR Irvine to Allendale, Belgravia, CPR Irvine. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

The number we quote is the number you pay

Priced on site, then fixed

An install price that moves halfway through is the most common complaint we hear about the trade. We quote Argyll homeowners a fixed price at the on-site quote and the number does not change.

The standard we hang to, across Argyll and Allendale, Belgravia, CPR Irvine

Every joint taped to Level 4, every texture matched precisely, and the walls left paint-ready rather than left for the painter to make good. Free on-site quotes, same-day reply, 7 days a week, throughout Argyll, Allendale, Belgravia, CPR Irvine and surrounding communities. Call or text ' . emp_phone() . '.

How it works

Simple, clean, on schedule — Drywall Installation in Argyll Edmonton

Free quote

We come out to your Argyll Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Argyll Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Argyll Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Argyll Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Argyll Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Argyll Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Argyll Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Argyll Edmonton

Drywall Installation Argyll Edmonton: your questions answered

What board do you use on Argyll exterior basement walls?: Moisture-resistant board on all Argyll exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Argyll home.
Do you board legal suites to spec?: Yes — 5/8-inch Type X fire-rated board on suite ceilings and soundproof board on party walls, to the City of Edmonton suite spec.
How long does drywall installation take in a Edmonton home in Edmonton?: A standard open basement in a Edmonton new build typically takes one to two days to board. A full renovation or larger new build takes longer depending on scope. Honest scheduling in Argyll: the quoted timeline is the real one. The taping crew can usually start the next day.
For Argyll exterior basement walls, what board do you use?: In Argyll, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Argyll home.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
Is drywall installation in Argyll a fixed price in Edmonton?: Yes. We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Argyll Edmonton

Drywall installation in Argyll — hung straight, screwed off right