Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

How do you handle texture matching after drywall installation work in Allendale?

Texture matching is part of every repair and patch job we do in Allendale. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Do you board for legal suites in Edmonton?

Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.

What board do you use on Allendale exterior basement walls?

Moisture-resistant board on all Allendale exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Allendale home.

Do you do drywall installation in Allendale?

Yes — Allendale is part of our regular service area, and we are usually booked within the week. We also cover Argyll, Belgravia, CPR Irvine and Scona.

Drywall Installation Allendale Edmonton | Board & Tape

Drywall installation in Allendale, hung straight and screwed off right

We provide drywall installation services in Allendale. Allendale is one of Scona’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Scona area. We cover Allendale, Argyll, Belgravia, CPR Irvine and the surrounding area, 7 days a week.

Drywall boarding and hanging in Allendale — new builds and renovations
Moisture-resistant board for Allendale exterior and wet-area walls
Allendale basement development boarded ceiling-first, then walls
Ready for taping when we leave an Allendale job — no rework
Moisture-resistant board on Allendale exterior walls and wet areas
Drywall boarding and hanging — new builds and renovations
Allendale basements boarded in order: ceiling, then walls

Drywall board types for Allendale homes

Standard board for most walls

Standard 1/2-inch drywall is correct for most interior walls and ceilings in Allendale away from moisture exposure.

Moisture-resistant, fire-rated and soundproof where the spec matters

Exterior basement walls and wet areas need moisture-resistant board; legal suite ceilings need fire-rated board; party walls need soundproof board. We specify the right product for every Allendale surface before we pull the first sheet.

Allendale drywall in context

About Allendale

Once farmed by the Allen family, this area was annexed by the City of Strathcona in 1907 and became part of Edmonton in 1912 when Strathcona and Edmonton amalgamated.

What we see in Allendale

In Allendale the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Argyll, Belgravia, CPR Irvine and Edmonton, 7 days a week — every established and newer Edmonton community from Argyll, Belgravia, CPR Irvine to Argyll, Belgravia, CPR Irvine. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Drywall installation work we do in Allendale in Edmonton

Basement development and new builds

Basement development boarding is a common call — ceiling first, then walls, with moisture-resistant board on every exterior foundation wall.

Renovation boarding and additions

We also board after walls come down for kitchen open-ups, additions and bathroom relocations in Allendale, matching thickness and plane to the adjacent surfaces so there is no visible seam once finished.

Board layout is decided before the first sheet

Where the joints land

On an Allendale wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

Our Edmonton drywall installation process in Edmonton, step by step

Ceiling board first — always

Every boarding job in Edmonton starts with the ceiling. Ceiling board goes up before the walls because the wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints carrying their own weight unsupported — they perform worse under the tape and are more likely to crack over time. No Allendale wall board goes up before the ceiling is complete.

Wall boarding — screw pattern, joint placement and board selection

Wall board goes up with the correct screw pattern: every 12 inches on the field, every 8 inches at the perimeter. All seams land on framing. Clean, square corners — inside and out — on Allendale jobs. We hold Allendale board to the window and door frames, no overrun. When the boarding is complete, every surface is at the right plane, the taping crew can start immediately and there is no rework to do before they begin.

Ceilings first, then walls

The order is not arbitrary

Ceiling board goes up first so the wall sheets push up underneath and support its edges.

What it prevents

Doing it the other way leaves the ceiling perimeter unsupported, and in an Allendale room that is where the cracking starts. It also gives a tighter joint at the wall-ceiling line, which is the joint people look at most.

How it works

Simple, clean, on schedule — Drywall Installation in Allendale Edmonton

Free quote

We come out to your Allendale Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Allendale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Allendale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Allendale Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Allendale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Allendale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Allendale Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Allendale Edmonton

Drywall Installation Allendale Edmonton: your questions answered

Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
How do you handle texture matching after drywall installation work in Allendale in Edmonton?: Texture matching is part of every repair and patch job we do in Allendale. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.
Do you board for legal suites in Edmonton?: Yes, and we know the spec. A legal secondary suite in Edmonton requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, STC soundproof board on party walls, and moisture-resistant in all wet areas. We board to that spec so the suite passes inspection.
Do you hang the ceiling board before the walls?: Yes, always. Ceiling board goes up first on every Edmonton installation job. Wall board butts up under the ceiling board and helps carry it. Reversing the sequence leaves ceiling joints unsupported — they crack sooner and perform worse under tape.
What board do you use on Allendale exterior basement walls?: Moisture-resistant board on all Allendale exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Allendale home.
Do you do drywall installation in Allendale in Edmonton?: Yes — Allendale is part of our regular service area, and we are usually booked within the week. We also cover Argyll, Belgravia, CPR Irvine and Scona.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Allendale Edmonton

Drywall installation in Allendale, hung straight and screwed off right