What board do you use on Allard exterior basement walls?

Moisture-resistant board on all Allard exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Allard home.

Does it matter which way the board runs?

Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.

What board do you use on exterior basement walls in Edmonton?

In Allard, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Allard interior walls get standard 1/2” board. Legal suites in Allard take 5/8” Type X on the ceiling and soundproof party walls. Each Allard surface gets its board product confirmed at the quote.

How long does drywall installation take in an Allard home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Allard are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Do you stand behind your installation work in Allard?

Yes. Before leaving Allard, we walk the boarding together and fix anything not right.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Drywall Installation Allard Edmonton | Board & Tape

Drywall installation hung straight and screwed off right

In Allard, the install sets up the finish. Level hanging, right screws, framed seams and clean mechanical/corner cuts — the Allard standard. Allard is one of Edmonton’s oldest communities. Renovation boarding in homes from the 1950s, 1960s and 1970s is the most common installation work here. We cover Allard, Ambleside, Blackburne, Blackmud Creek and the surrounding area, 7 days a week.

Drywall boarding and hanging in Allard — new builds and renovations
Allard screw spacing to spec, seams landed on framing
Drywall boarding in Allard — new builds and renovations
Allard exterior walls and wet areas get moisture-resistant board
Moisture-resistant board on Allard exterior walls and wet areas
Basement development boarding in Allard — ceiling first, then walls
Ceiling-first, then-walls basement boarding in Allard

Our Allard drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Allard starts with the ceiling, because the wall board butts up under it and helps carry it. In Allard, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Allard, completed boarding hands straight to taping with nothing to fix.

Why Edmonton homeowners trust Emplastrum for drywall installation in Edmonton

We board the way a finishing specialist wants it boarded

Most boarding crews treat installation as a volume game — get the board up, move on. Every taping problem we have fixed over the years started with a boarding problem underneath it. We board every Edmonton job the way we would want it boarded before we tape it: ceiling first, correct screw pattern, seams on framing, board plumb. The finish is better because the boarding behind it is right.

Fixed price, same-day reply, all Edmonton quadrants

We cover all four Edmonton quadrants, Edmonton, Ambleside, Blackburne, Blackmud Creek and Edmonton, 7 days a week — every established and newer Edmonton community from Ambleside, Blackburne, Blackmud Creek to Ambleside, Blackburne, Blackmud Creek. Free on-site quotes, fixed prices — you know the number before we start and it does not change.

Board layout is decided before the first sheet

Where the joints land

On an Allard wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

What affects the cost of drywall installation in Allard in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Allard comes down to the total square footage, the board type (standard, moisture-resistant, fire-rated and soundproof price differently), and whether the job is a new development or a renovation around existing trades. We measure on site and give a fixed price before we start.

Board spec in Allard

The work here usually calls for settling cracks, nail pops and tired texture. The Allard quote maps each surface to its correct board — no inspection surprises.

About Drywall Installation in Allard in Edmonton

Drywall Installation in Allard — what to expect

We provide drywall installation services in Allard and surrounding communities, 7 days a week. Allard is one of Southwest’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Southwest area.

Fixed price — assessed on site in Allard

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

Drywall board types used in Allard homes

Standard 1/2” drywall — the right choice for most Allard walls

Standard 1/2” drywall is correct for interior walls and ceilings in Allard homes away from moisture exposure. It is the most common board we install, finishes the same as the rest of the house and is what most Allard walls and ceilings should be. Most interior walls and ceilings in Allard homes use standard 1/2” board.

Moisture-resistant, fire-rated and soundproof — where spec matters in Allard

Exterior basement walls in Allard homes need moisture-resistant board. In Allard, every bathroom and laundry wall takes moisture-resistant board. An Allard suite ceiling must carry 5/8” Type X fire-rated board. In Allard, the suite-to-main party wall takes STC soundproof board. The right board per Allard surface is set at the quote for a clean inspection.

How it works

Simple, clean, on schedule — Drywall Installation in Allard Edmonton

Free quote

We come out to your Allard Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Allard Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Allard Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Allard Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Allard Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Allard Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Allard Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Allard Edmonton

Drywall Installation Allard Edmonton: your questions answered

What board do you use on Allard exterior basement walls?: Moisture-resistant board on all Allard exterior foundation walls and around plumbing and laundry. Standard 1/2-inch board for interior walls away from moisture in your Allard home.
Does it matter which way the board runs?: Yes. Running horizontally puts one long joint at a comfortable working height instead of several vertical ones and usually means fewer joints. Joint placement decides how much finishing the room needs.
What board do you use on exterior basement walls in Edmonton?: In Allard, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Away from moisture, Allard interior walls get standard 1/2” board. Legal suites in Allard take 5/8” Type X on the ceiling and soundproof party walls. Each Allard surface gets its board product confirmed at the quote.
How long does drywall installation take in an Allard home in Edmonton?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Allard are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
Do you stand behind your installation work in Allard?: Yes. Before leaving Allard, we walk the boarding together and fix anything not right.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Allard Edmonton

Drywall installation hung straight and screwed off right