Do you cover all of Edmonton for drywall installation?

Yes — we cover all four Edmonton quadrants, Edmonton, Abbottsfield, Beacon Heights, Bellevue, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

Do you hang the ceiling board first?

Yes, always. Ceiling board goes up before wall board on every job in Alberta Avenue. In Alberta Avenue, the wall board tucks under the ceiling board to support it. Out of order, Alberta Avenue ceiling joints carry their own weight and crack sooner. In Alberta Avenue, walls wait until the ceiling is boarded.

For Alberta Avenue exterior basement walls, what board do you use?

In Alberta Avenue, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Alberta Avenue home.

Should the board touch the floor?

No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.

Does Alberta Avenue taping follow straight after boarding?

Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Alberta Avenue.

How do you handle texture matching after drywall installation work in Alberta Avenue?

Texture matching is part of every repair and patch job we do in Alberta Avenue. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

Drywall Installation Alberta Avenue Edmonton | Board & Tape

Drywall installation in Alberta Avenue — right board, right spec, ready to tape

A good Alberta Avenue finish starts with good boarding. In Alberta Avenue the board goes up level, correctly screwed, seams on framing, clean cuts at mechanical and corners. Alberta Avenue is one of North Central’s newest communities — most homes have framed, unfinished basements ready for boarding. We cover Alberta Avenue, Ambleton, Abbottsfield, Beacon Heights, Bellevue and the surrounding area, 7 days a week.

Moisture-resistant board for Alberta Avenue exterior and wet-area walls
Fire-rated 5/8” Type X on suite ceilings where required
Renovation reboarding — removing old board, installing new to current spec
Bulkheads, soffits, archways and ceiling work
Correct screw pattern throughout — all seams on framing
Ceiling-first, then-walls basement boarding in Alberta Avenue
Correct screw pattern and every seam on framing in Alberta Avenue

Drywall installation work we do across Edmonton in Edmonton

Basement development boarding in Edmonton — new builds and existing homes

The most common boarding call across Edmonton is full basement development. In newer Edmonton communities — Abbottsfield, Beacon Heights, Bellevue — the builder framed the basement and the homeowner is ready to develop it. We board ceiling first, then the walls, with moisture-resistant on every exterior foundation wall. In older Edmonton communities — Abbottsfield, Beacon Heights, Bellevue — the call is often a legal suite conversion with fire-rated and soundproof board to spec.

Renovation boarding and room additions in established Edmonton communities

Established Edmonton homeowners renovating their main floors call us for boarding after walls come down. Kitchen open-ups, room additions, bathroom relocations — all require new board hung to match the adjacent surfaces. We assess the framing, select the right board thickness, hang level and leave the newly boarded walls ready for taping. No visible seam between old and new.

Alberta Avenue drywall in context

About Alberta Avenue

One of the city's older residential neighbourhoods, Alberta Avenue is located in the inner city.

What we see in Alberta Avenue

In Alberta Avenue the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Board layout is decided before the first sheet

Where the joints land

On an Alberta Avenue wall, running board horizontally puts one long joint at a comfortable working height instead of several vertical ones, and it usually means fewer joints overall.

Why it is planned

Joint placement decides how much finishing the room needs and where the visible risk sits. Sheets hung wherever they happen to reach is the difference between a wall that finishes easily and one that fights you.

Our Alberta Avenue drywall installation process in Edmonton, step by step

Ceiling board first, always

Every boarding job in Alberta Avenue starts with the ceiling, because the wall board butts up under it and helps carry it. In Alberta Avenue, reversing the order under-supports the joints.

Wall board and seams

Walls go up with correct screws and framed seams. In Alberta Avenue, completed boarding hands straight to taping with nothing to fix.

What affects the cost of drywall installation in Edmonton in Edmonton?

Square footage, board type and ceiling complexity

The cost of drywall installation in Edmonton comes down to four things: total square footage of wall and ceiling, board type (standard, moisture-resistant, fire-rated and soundproof are priced differently), ceiling complexity (flat ceilings vs. vaulted, cathedral, bulkheads and soffits), and whether the job is a new development or a renovation around existing trades and fixtures. We measure on site and give you a fixed price before we start.

Board spec in Edmonton — right product on every surface

Exterior foundation walls need moisture-resistant board. Moisture-resistant board on all Alberta Avenue bathroom and laundry walls. Legal suite ceilings need 5/8” Type X fire-rated board. Party walls between a suite and the main living area need STC soundproof board. In Alberta Avenue, moisture-free interior walls use standard 1/2” board. We map every surface at the on-site quote and specify the right product — so there are no surprises when the inspector comes.

Ceilings first, then walls

The order is not arbitrary

Ceiling board goes up first so the wall sheets push up underneath and support its edges.

What it prevents

Doing it the other way leaves the ceiling perimeter unsupported, and in an Alberta Avenue room that is where the cracking starts. It also gives a tighter joint at the wall-ceiling line, which is the joint people look at most.

About Drywall Installation in Alberta Avenue in Edmonton

Drywall Installation in Alberta Avenue — what to expect

We provide drywall installation services in Alberta Avenue and surrounding communities, 7 days a week. Alberta Avenue is one of North Central’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established North Central area.

Fixed price — assessed on site in Alberta Avenue

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

How it works

Simple, clean, on schedule — Drywall Installation in Alberta Avenue Edmonton

Free quote

We come out to your Alberta Avenue Edmonton property, take a real look at the drywall installation, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall installation quote in Alberta Avenue Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall installation in Alberta Avenue Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Alberta Avenue Edmonton home while we finish the drywall installation to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall installation with us and you're happy with the result in Alberta Avenue Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall installation contractor Alberta Avenue Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall installation project in Alberta Avenue Edmonton.

Read our reviews on Google

FAQ — Drywall Installation Alberta Avenue Edmonton

Drywall Installation Alberta Avenue Edmonton: your questions answered

Do you cover all of Edmonton for drywall installation in Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Abbottsfield, Beacon Heights, Bellevue, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
Do you hang the ceiling board first?: Yes, always. Ceiling board goes up before wall board on every job in Alberta Avenue. In Alberta Avenue, the wall board tucks under the ceiling board to support it. Out of order, Alberta Avenue ceiling joints carry their own weight and crack sooner. In Alberta Avenue, walls wait until the ceiling is boarded.
For Alberta Avenue exterior basement walls, what board do you use?: In Alberta Avenue, exterior foundation walls and plumbing or laundry areas take moisture-resistant board. Standard 1/2-inch board for interior walls away from moisture in your Alberta Avenue home.
Should the board touch the floor?: No. A small gap keeps it from wicking moisture and gives the building room to move. Joints are also kept away from the corners of window and door openings, because that is where movement concentrates.
Does Alberta Avenue taping follow straight after boarding?: Yes — we hang board with seams on framing, correct screw pattern and plumb walls, so a taper (or we ourselves) can start the very next day in Alberta Avenue.
How do you handle texture matching after drywall installation work in Alberta Avenue in Edmonton?: Texture matching is part of every repair and patch job we do in Alberta Avenue. Whether the surrounding surface is knockdown, smooth or an older pattern, we match it so the repair is not visible under paint.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Installation Alberta Avenue Edmonton

Drywall installation in Alberta Avenue — right board, right spec, ready to tape