Can you board only and leave the finishing to us?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Walker home.

Will you hang the board in Walker and let our taper finish?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Walker home.

Do you take board-only Walker jobs where we finish ourselves?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Walker home.

Do you stand behind your boarding in Walker?

Yes. We check the board is flat and fastened before we leave your Walker job, and if something is not right we come back and make it right.

Does it matter how the board is stored on site?

Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

What is a butt joint and why avoid it?

Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Drywall Boarding Walker Edmonton | Board Hanging

Drywall boarding in Walker, hung for the finish

On Walker jobs the finish is only as good as the hang: straight, square, tight sheets, staggered joints, correct board per surface. In Walker we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Walker is one of Ellerslie's newer communities, where fresh installation and first-year settling work are common, so boarding work here is steady. We cover Walker, Charlesworth, Decoteau, Ellerslie and Ellerslie, 7 days a week.

Full-sheet drywall hanging and boarding in Walker
Charlesworth, Decoteau, Ellerslie coverage — we come to you
Tape-ready hand-off or full finish, your choice in Walker
Walker coverage — we come to you
Ready for tape, or we finish it too
Fire-rated, moisture-resistant and soundproof board to spec
Ready-for-tape or fully finished — both offered in Walker

What affects the cost of drywall boarding in Walker in Edmonton?

Area, board spec and access

The cost of boarding in Walker tracks the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and access — high ceilings and tight stairwells take more time. We price off the framing and a site look.

The right board in Walker

We put the correct board on every surface — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations — so your Walker project meets code before the tape goes on.

Handling and storing board on site

It is fragile until it is up

Drywall damages at the edges, absorbs moisture from a damp Walker slab and bows if stacked badly.

What we do

Stored flat and off the floor, kept dry, and not delivered weeks before it is needed. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

Butt joints are the enemy

No taper to work with

Factory sheet edges are tapered so tape and compound sit below the surface. A butt joint — two cut ends meeting — has no taper, so the repair has to be built up and feathered wide.

How we reduce them

Longer sheets, planned layout, and running board the length of the wall rather than stacking short pieces. Every butt joint removed at hanging is a bulge the finisher does not have to disguise.

Our Walker drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Charlesworth, Decoteau, Ellerslie is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Why Walker homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in Walker we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across Walker and Ellerslie, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

Our Walker drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Walker is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

How it works

Simple, clean, on schedule — Drywall Boarding in Walker Edmonton

Free quote

We come out to your Walker Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Walker Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Walker Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Walker Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Walker Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Walker Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Walker Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Walker Edmonton

Drywall Boarding Walker Edmonton: your questions answered

Can you board only and leave the finishing to us?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Walker home.
Will you hang the board in Walker and let our taper finish?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Walker home.
Do you take board-only Walker jobs where we finish ourselves?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Walker home.
Do you stand behind your boarding in Walker?: Yes. We check the board is flat and fastened before we leave your Walker job, and if something is not right we come back and make it right.
Does it matter how the board is stored on site?: Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.
What is a butt joint and why avoid it?: Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Walker Edmonton

Drywall boarding in Walker, hung for the finish