Is boarding-only an option for Strathearn builds?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Strathearn home.

Do ceilings or walls go up first?

Ceilings, always. The wall sheets then support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.

Should we use longer sheets?

On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Can you board over my existing plaster?

Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Do you use the right board for code in Strathearn?

Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Strathearn project meets code.

What is a butt joint and why avoid it?

Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Drywall Boarding Strathearn Edmonton | Board Hanging

Drywall boarding in Avonmore, Bonnie Doon, Capilano, hung straight and square

On Strathearn jobs the finish is only as good as the hang: straight, square, tight sheets, staggered joints, correct board per surface. In Strathearn we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Strathearn is this established Southeast community where reno, repair and ceiling drywall are common, so boarding work here is steady. We cover Strathearn, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Full-sheet drywall hanging and boarding in Avonmore, Bonnie Doon, Capilano
Ready for tape, or we finish it too
Joints staggered, sheets hung tight and square
Ceilings boarded first, then walls
Fire-rated, moisture-resistant and soundproof board to spec
Ready-for-tape or fully finished — both offered in Strathearn
We leave Strathearn board tape-ready, or carry the finish ourselves

Our Strathearn drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Avonmore, Bonnie Doon, Capilano is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Strathearn drywall in context

About Strathearn

McKernan, Edmonton's first telegraph operator, and W.

What we see in Strathearn

In Strathearn the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Handling and storing board on site

It is fragile until it is up

Drywall damages at the edges, absorbs moisture from a damp Strathearn slab and bows if stacked badly.

What we do

Stored flat and off the floor, kept dry, and not delivered weeks before it is needed. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

Boarding over existing walls in a renovation

Sometimes the right answer

Where Strathearn plaster is failing across a wall, boarding over it can be faster and flatter than rebuilding the plaster.

What to watch

It costs wall thickness at every opening — window reveals, door casings and outlets all need extending. We point out those knock-on costs before you choose it, because they are what makes the decision.

Sheet length and when to pay for 12-footers

Fewer joints, better wall

A 12-foot sheet across a long Strathearn hallway removes joints that a 8-footers would create. It costs slightly more and handles harder.

Where it matters

Long walls, great rooms, and anywhere with raking light. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Boarding new builds, basements and renos in Strathearn

New construction and additions

In Avonmore, Bonnie Doon, Capilano we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Why Strathearn homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in Avonmore, Bonnie Doon, Capilano we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

How it works

Simple, clean, on schedule — Drywall Boarding in Strathearn Edmonton

Free quote

We come out to your Strathearn Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Strathearn Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Strathearn Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Strathearn Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Strathearn Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Strathearn Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Strathearn Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Strathearn Edmonton

Drywall Boarding Strathearn Edmonton: your questions answered

Is boarding-only an option for Strathearn builds?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Strathearn home.
Do ceilings or walls go up first?: Ceilings, always. The wall sheets then support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.
Should we use longer sheets?: On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.
Can you board over my existing plaster?: Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
Do you use the right board for code in Strathearn?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Strathearn project meets code.
What is a butt joint and why avoid it?: Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Strathearn Edmonton

Drywall boarding in Avonmore, Bonnie Doon, Capilano, hung straight and square