What is a butt joint and why avoid it?

Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Will you hang the board in Starling and let our taper finish?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Starling home.

Can you board over my existing plaster?

Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Do you use the right board for code in Starling?

Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Breckenridge Greens, Edgemont, Glastonbury project meets code.

Do you use the right board for code in Starling?

Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Starling project meets code.

Drywall Boarding Starling Edmonton | Board Hanging

Drywall boarding in Starling, hung for the finish

Good finishing starts with good boarding — sheets hung straight, square and tight, with joints staggered and the right board on every surface. In Starling we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Starling is this established West Henday community where reno, repair and ceiling drywall are common, so boarding work here is steady. We cover Starling, Breckenridge Greens, Edgemont, Glastonbury and West Henday, 7 days a week.

Starling coverage — we come to you
New builds, additions, basements and renos
Ceilings boarded first, then walls
Ready for tape, or we finish it too
We leave Starling board tape-ready, or carry the finish ourselves
Tape-ready hand-off or full finish, your choice in Starling
Breckenridge Greens, Edgemont, Glastonbury coverage — we come to you

Butt joints are the enemy

No taper to work with

Factory sheet edges are tapered so tape and compound sit below the surface. A butt joint — two cut ends meeting — has no taper, so the repair has to be built up and feathered wide.

How we reduce them

Longer sheets, planned layout, and running board the length of the wall rather than stacking short pieces. Every butt joint removed at hanging is a bulge the finisher does not have to disguise.

Why hanging decides the finish

The finisher inherits the layout

Where the sheets land, how many butt joints there are and whether the edges hit framing all get decided at hanging. A finisher can only work with what they are given.

The cheapest quality decision

Good hanging costs the same in materials as bad hanging. On an Starling job it is the single highest-leverage stage, and the one clients never see.

Cutting around openings and boxes

Tight cuts, not filled gaps

A generous cut around an electrical box in an Starling wall gets filled with compound, which cracks and is also a hole in the air seal.

How it should be

Measured and cut to fit. It is slower and it produces a wall that both finishes better and performs better, which is why we do not let it slide as a small thing.

Boarding over existing walls in a renovation

Sometimes the right answer

Where Starling plaster is failing across a wall, boarding over it can be faster and flatter than rebuilding the plaster.

What to watch

It costs wall thickness at every opening — window reveals, door casings and outlets all need extending. We point out those knock-on costs before you choose it, because they are what makes the decision.

Ceilings first, always

Order is structural

Ceiling board goes up before wall board so the wall sheets support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.

Also practical

Working overhead with a clear floor is faster and safer than working around stacked wall sheets, which matters on a whole-house Starling job.

Common drywall boarding situations in Starling in Edmonton

In Starling, starling sits in Edmonton's West Henday district. Across roughly 260 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Starling and the surrounding West Henday district, 7 days a week. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

How it works

Simple, clean, on schedule — Drywall Boarding in Starling Edmonton

Free quote

We come out to your Starling Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Starling Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Starling Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Starling Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Starling Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Starling Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Starling Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Starling Edmonton

Drywall Boarding Starling Edmonton: your questions answered

What is a butt joint and why avoid it?: Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.
Will you hang the board in Starling and let our taper finish?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Starling home.
Can you board over my existing plaster?: Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
Do ceilings or walls go up first?: Ceilings, always. The wall sheets then support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.
Do you use the right board for code in Starling?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Breckenridge Greens, Edgemont, Glastonbury project meets code.
Do you use the right board for code in Starling?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Starling project meets code.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Starling Edmonton

Drywall boarding in Starling, hung for the finish