What is a butt joint and why avoid it?

Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Can you board only and leave the finishing to us?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Sherwood Park home.

Does it matter how the board is stored on site?

Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

Do you stand behind your boarding in Sherwood Park?

Yes. We check the board is flat and fastened before we leave your Edmonton job, and if something is not right we come back and make it right.

Drywall Boarding Sherwood Park | Board Hanging

Drywall boarding in Edmonton, hung straight and square

Good finishing starts with good boarding — sheets hung straight, square and tight, with joints staggered and the right board on every surface. In Sherwood Park we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Sherwood Park is this established Edmonton community where reno, repair and ceiling drywall are common, so boarding work here is steady. We cover Sherwood Park, Edmonton and Edmonton, 7 days a week.

New builds, additions, basements and renos
Full-sheet drywall hanging and boarding in Sherwood Park
Joints staggered, sheets hung tight and square
Full-sheet drywall hanging and boarding in Edmonton
Sherwood Park coverage — we come to you
Tape-ready hand-off or full finish, your choice in Sherwood Park
Edmonton coverage — we come to you

Boarding new builds, basements and renos in Sherwood Park

New construction and additions

In Edmonton we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Sherwood Park drywall in context

About Sherwood Park

A high share of Sherwood Park homes date from the Poly-B era, so repipe patching and texture matching after a plumbing replacement is common here.

What we see in Sherwood Park

In Sherwood Park the drywall work is both plaster and stipple repair and new-build basement development. We confirm what your home actually needs on site, in writing, before anything starts.

What affects the cost of drywall boarding in Sherwood Park?

Area, board spec and access

The cost of boarding in Edmonton tracks the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and access — high ceilings and tight stairwells take more time. We price off the framing and a site look.

The right board in Edmonton

We put the correct board on every surface — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations — so your Edmonton project meets code before the tape goes on.

Boarding over existing walls in a renovation

Sometimes the right answer

Where Sherwood Park plaster is failing across a wall, boarding over it can be faster and flatter than rebuilding the plaster.

What to watch

It costs wall thickness at every opening — window reveals, door casings and outlets all need extending. We point out those knock-on costs before you choose it, because they are what makes the decision.

Our Sherwood Park drywall boarding process, step by step

Ceilings first, then walls

Boarding in Edmonton is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Cutting around openings and boxes

Tight cuts, not filled gaps

A generous cut around an electrical box in an Sherwood Park wall gets filled with compound, which cracks and is also a hole in the air seal.

How it should be

Measured and cut to fit. It is slower and it produces a wall that both finishes better and performs better, which is why we do not let it slide as a small thing.

Choosing board room by room

Not one product

An Sherwood Park house typically needs standard board through living areas, moisture-resistant in bathrooms and laundry, Type X in the garage assembly and any rated separation, and sometimes acoustic assemblies in bedrooms.

Ordered as a mix

Getting that right at ordering prevents the substitution that happens when the wrong board is what is on site and the schedule is tight.

How it works

Simple, clean, on schedule — Drywall Boarding in Sherwood Park

Free quote

We come out to your Sherwood Park property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Sherwood Park starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Sherwood Park. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Sherwood Park home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Sherwood Park. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Sherwood Park Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Sherwood Park trusts for repair, restoration and finishing — rated on Google by Sherwood Park homeowners.

Read the reviews, or leave your own after your drywall boarding project in Sherwood Park.

Read our reviews on Google

FAQ — Drywall Boarding Sherwood Park

Drywall Boarding Sherwood Park: your questions answered

What is a butt joint and why avoid it?: Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.
Can you board only and leave the finishing to us?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Sherwood Park home.
Do you use the right board for code in Sherwood Park?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Edmonton project meets code.
Does it matter how the board is stored on site?: Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.
Do you use the right board for code in Sherwood Park?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Sherwood Park project meets code.
Do you stand behind your boarding in Sherwood Park?: Yes. We check the board is flat and fastened before we leave your Edmonton job, and if something is not right we come back and make it right.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Sherwood Park

Drywall boarding in Edmonton, hung straight and square