Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Board hanging in Rio Terrace that makes the taping easier

Every Rio Terrace finish rests on the boarding: sheets tight and square, joints staggered, and the right board in the right place. In Rio Terrace we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Rio Terrace is an older Jasper Place community where settling cracks, aging texture and the occasional plaster repair come up, so boarding work here is steady. We cover Rio Terrace, Britannia Youngstown, Canora, Crestwood and Jasper Place, 7 days a week.

Drywall Boarding Rio Terrace Edmonton

Watch drywall boarding jobs in Rio Terrace Edmonton on our YouTube channel

Boarding new builds, basements and renos in Rio Terrace

New construction and additions

In Rio Terrace we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Rio Terrace drywall in context

About Rio Terrace

Rio Terrace's perch on the north bank of the river valley provides spectacular views of the valley and Fort Edmonton Park, one of the City's most popular attractions.

What we see in Rio Terrace

In Rio Terrace the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Screw pattern, depth and why it is checked

Spacing is specified

Fastener spacing on ceilings and walls comes from the assembly, and inspectors check it. Under-fastening shows up later as nail pops and cracked joints.

Depth matters as much

A screw driven through the paper face has lost its hold and is a defect. Set right it dimples without breaking the paper. Most of what a good hanging crew is paid for is this, repeated thousands of times.

Our Rio Terrace drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Britannia Youngstown, Canora, Crestwood is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Why Rio Terrace homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in Rio Terrace we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across Rio Terrace and Jasper Place, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

Boarding to suit the trades that follow

Leave them what they need

Access panels, bath surrounds, cabinet backing and shower niches all affect where board goes and where it stops.

Asking first

We would rather know the Rio Terrace tiler needs a particular substrate behind the shower, or the plumber needs an access panel, before boarding than cut into a finished wall for it afterwards.

Butt joints are the enemy

No taper to work with

Factory sheet edges are tapered so tape and compound sit below the surface. A butt joint — two cut ends meeting — has no taper, so the repair has to be built up and feathered wide.

How we reduce them

Longer sheets, planned layout, and running board the length of the wall rather than stacking short pieces. Every butt joint removed at hanging is a bulge the finisher does not have to disguise.

Simple, clean, on schedule — Drywall Boarding in Rio Terrace Edmonton

1

Free quote

We come out to your Rio Terrace Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Rio Terrace Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Rio Terrace Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Rio Terrace Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Rio Terrace Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the drywall boarding contractor Rio Terrace Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Rio Terrace Edmonton.

Read our reviews on Google

Drywall Boarding Rio Terrace Edmonton: your questions answered

Do you use the right board for code in Rio Terrace?
Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Rio Terrace project meets code.
Why does it matter who hangs the board if someone else tapes it?
Because the finisher can only work with what they are given. Sheet layout, butt joints and whether edges land on framing are all decided at hanging, and good hanging costs the same in materials as bad hanging.
Does it matter how the board is stored on site?
Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.
What is a butt joint and why avoid it?
Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.
Do you take board-only Rio Terrace jobs where we finish ourselves?
Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Rio Terrace home.
Will you hang the board in Rio Terrace and let our taper finish?
Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Rio Terrace home.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook