Do you take board-only Richfield jobs where we finish ourselves?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Richfield home.

Will you hang the board in Richfield and let our taper finish?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Richfield home.

Do you use the right board for code in Richfield?

Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Bisset, Crawford Plains, Daly Grove project meets code.

Is boarding-only an option for Richfield builds?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Richfield home.

Do you stand behind your boarding in Richfield?

Yes. We check the board is flat and fastened before we leave your Richfield job, and if something is not right we come back and make it right.

Can you board over my existing plaster?

Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Drywall Boarding Richfield Edmonton | Board Hanging

Drywall boarding in Bisset, Crawford Plains, Daly Grove, hung straight and square

Good finishing starts with good boarding — sheets hung straight, square and tight, with joints staggered and the right board on every surface. In Richfield we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Richfield is an older Mill Woods and Meadows community where settling cracks, aging texture and the occasional plaster repair come up, so boarding work here is steady. We cover Richfield, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Ceilings boarded first, then walls
We leave Richfield board tape-ready, or carry the finish ourselves
Fire-rated, moisture-resistant and soundproof board to spec
Ready-for-tape or fully finished — both offered in Richfield
New builds, additions, basements and renos
Bisset, Crawford Plains, Daly Grove coverage — we come to you
Richfield coverage — we come to you

Screw pattern, depth and why it is checked

Spacing is specified

Fastener spacing on ceilings and walls comes from the assembly, and inspectors check it. Under-fastening shows up later as nail pops and cracked joints.

Depth matters as much

A screw driven through the paper face has lost its hold and is a defect. Set right it dimples without breaking the paper. Most of what a good hanging crew is paid for is this, repeated thousands of times.

Richfield drywall in context

About Richfield

Part of Mill Woods, Richfield was developed in the 1970s in a system of pleasantly curving streets and cul-de-sacs.

What we see in Richfield

In Richfield the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Boarding new builds, basements and renos in Richfield

New construction and additions

In Richfield we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Our Richfield drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Bisset, Crawford Plains, Daly Grove is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Boarding over existing walls in a renovation

Sometimes the right answer

Where Richfield plaster is failing across a wall, boarding over it can be faster and flatter than rebuilding the plaster.

What to watch

It costs wall thickness at every opening — window reveals, door casings and outlets all need extending. We point out those knock-on costs before you choose it, because they are what makes the decision.

Sheet length and when to pay for 12-footers

Fewer joints, better wall

A 12-foot sheet across a long Richfield hallway removes joints that a 8-footers would create. It costs slightly more and handles harder.

Where it matters

Long walls, great rooms, and anywhere with raking light. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Ceilings first, always

Order is structural

Ceiling board goes up before wall board so the wall sheets support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.

Also practical

Working overhead with a clear floor is faster and safer than working around stacked wall sheets, which matters on a whole-house Richfield job.

How it works

Simple, clean, on schedule — Drywall Boarding in Richfield Edmonton

Free quote

We come out to your Richfield Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Richfield Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Richfield Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Richfield Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Richfield Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Richfield Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Richfield Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Richfield Edmonton

Drywall Boarding Richfield Edmonton: your questions answered

Do you take board-only Richfield jobs where we finish ourselves?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Richfield home.
Will you hang the board in Richfield and let our taper finish?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Richfield home.
Do you use the right board for code in Richfield?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Bisset, Crawford Plains, Daly Grove project meets code.
Is boarding-only an option for Richfield builds?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Richfield home.
Do you stand behind your boarding in Richfield?: Yes. We check the board is flat and fastened before we leave your Richfield job, and if something is not right we come back and make it right.
Can you board over my existing plaster?: Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Richfield Edmonton

Drywall boarding in Bisset, Crawford Plains, Daly Grove, hung straight and square