What is a butt joint and why avoid it?

Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Is boarding-only an option for Paisley builds?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Paisley home.

Do you use the right board for code in Paisley?

Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Allard, Ambleside, Blackburne project meets code.

Do you use the right board for code in Paisley?

Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Paisley project meets code.

Can you board over my existing plaster?

Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Does it matter how the board is stored on site?

Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

Drywall Boarding Paisley Edmonton | Board Hanging

Board hanging in Paisley that makes the taping easier

On Paisley jobs the finish is only as good as the hang: straight, square, tight sheets, staggered joints, correct board per surface. In Paisley we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Paisley is this established Southwest community where reno, repair and ceiling drywall are common, so boarding work here is steady. We cover Paisley, Allard, Ambleside, Blackburne and Southwest, 7 days a week.

Full-sheet drywall hanging and boarding in Allard, Ambleside, Blackburne
New builds, additions, basements and renos
Full-sheet drywall hanging and boarding in Paisley
Joints staggered, sheets hung tight and square
Ready for tape, or we finish it too
Tape-ready hand-off or full finish, your choice in Paisley
We leave Paisley board tape-ready, or carry the finish ourselves

Butt joints are the enemy

No taper to work with

Factory sheet edges are tapered so tape and compound sit below the surface. A butt joint — two cut ends meeting — has no taper, so the repair has to be built up and feathered wide.

How we reduce them

Longer sheets, planned layout, and running board the length of the wall rather than stacking short pieces. Every butt joint removed at hanging is a bulge the finisher does not have to disguise.

Boarding new builds, basements and renos in Paisley

New construction and additions

In Allard, Ambleside, Blackburne we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Boarding to suit the trades that follow

Leave them what they need

Access panels, bath surrounds, cabinet backing and shower niches all affect where board goes and where it stops.

Asking first

We would rather know the Paisley tiler needs a particular substrate behind the shower, or the plumber needs an access panel, before boarding than cut into a finished wall for it afterwards.

Why Paisley homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in Allard, Ambleside, Blackburne we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across Allard, Ambleside, Blackburne and Southwest, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

Our Paisley drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Allard, Ambleside, Blackburne is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Boarding new builds, basements and renos in Paisley

New construction and additions

In Paisley we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

How it works

Simple, clean, on schedule — Drywall Boarding in Paisley Edmonton

Free quote

We come out to your Paisley Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Paisley Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Paisley Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Paisley Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Paisley Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Paisley Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Paisley Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Paisley Edmonton

Drywall Boarding Paisley Edmonton: your questions answered

What is a butt joint and why avoid it?: Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.
Is boarding-only an option for Paisley builds?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Paisley home.
Do you use the right board for code in Paisley?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Allard, Ambleside, Blackburne project meets code.
Do you use the right board for code in Paisley?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Paisley project meets code.
Can you board over my existing plaster?: Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
Does it matter how the board is stored on site?: Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Paisley Edmonton

Board hanging in Paisley that makes the taping easier