Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Board hanging in Michaels Park that makes the taping easier

On Michaels Park jobs the finish is only as good as the hang: straight, square, tight sheets, staggered joints, correct board per surface. In Michaels Park we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Michaels Park is this established Mill Woods and Meadows community where reno, repair and ceiling drywall are common, so boarding work here is steady. We cover Michaels Park, Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows, 7 days a week.

Drywall Boarding Michaels Park Edmonton

Watch drywall boarding jobs in Michaels Park Edmonton on our YouTube channel

Ceilings first, always

Order is structural

Ceiling board goes up before wall board so the wall sheets support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.

Also practical

Working overhead with a clear floor is faster and safer than working around stacked wall sheets, which matters on a whole-house Michaels Park job.

Michaels Park drywall in context

About Michaels Park

Michaels Park was named in honour of John Michaels who was involved in community service for 50 years and was best known for his promotion of aviation and the north country.

What we see in Michaels Park

In Michaels Park the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Boarding new builds, basements and renos in Michaels Park

New construction and additions

In Michaels Park we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Choosing board room by room

Not one product

An Michaels Park house typically needs standard board through living areas, moisture-resistant in bathrooms and laundry, Type X in the garage assembly and any rated separation, and sometimes acoustic assemblies in bedrooms.

Ordered as a mix

Getting that right at ordering prevents the substitution that happens when the wrong board is what is on site and the schedule is tight.

Cutting around openings and boxes

Tight cuts, not filled gaps

A generous cut around an electrical box in an Michaels Park wall gets filled with compound, which cracks and is also a hole in the air seal.

How it should be

Measured and cut to fit. It is slower and it produces a wall that both finishes better and performs better, which is why we do not let it slide as a small thing.

Our Michaels Park drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Michaels Park is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Why hanging decides the finish

The finisher inherits the layout

Where the sheets land, how many butt joints there are and whether the edges hit framing all get decided at hanging. A finisher can only work with what they are given.

The cheapest quality decision

Good hanging costs the same in materials as bad hanging. On an Michaels Park job it is the single highest-leverage stage, and the one clients never see.

Simple, clean, on schedule — Drywall Boarding in Michaels Park Edmonton

1

Free quote

We come out to your Michaels Park Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Michaels Park Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Michaels Park Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Michaels Park Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Michaels Park Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the drywall boarding contractor Michaels Park Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Michaels Park Edmonton.

Read our reviews on Google

Drywall Boarding Michaels Park Edmonton: your questions answered

Should we use longer sheets?
On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.
Do you do drywall boarding in Michaels Park in Edmonton?
Yes — boarding in Bisset, Crawford Plains, Daly Grove is part of our regular work, and we book to your schedule. We also cover Bisset, Crawford Plains, Daly Grove and Mill Woods and Meadows.
Does it matter how the board is stored on site?
Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.
Can you board over my existing plaster?
Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
What is a butt joint and why avoid it?
Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.
Do you take board-only Michaels Park jobs where we finish ourselves?
Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Michaels Park home.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook