Does it matter how the board is stored on site?

Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

Do you stand behind your boarding in McKernan?

Yes. We check the board is flat and fastened before we leave your McKernan job, and if something is not right we come back and make it right.

Can you board over my existing plaster?

Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Do you board ceilings and walls?

Yes — we board ceilings first then walls, with staggered joints and tight fastening, so the finishing goes on flat.

Will you hang the board in McKernan and let our taper finish?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your McKernan home.

Should we use longer sheets?

On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Drywall Boarding McKernan Edmonton | Board Hanging

Drywall boarding in McKernan, hung for the finish

On McKernan jobs the finish is only as good as the hang: straight, square, tight sheets, staggered joints, correct board per surface. In McKernan we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. McKernan is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so boarding work here is steady. We cover McKernan, Allendale, Argyll, Belgravia and Scona, 7 days a week.

New builds, additions, basements and renos
McKernan coverage — we come to you
Ready for tape, or we finish it too
Full-sheet drywall hanging and boarding in McKernan
We leave McKernan board tape-ready, or carry the finish ourselves
Allendale, Argyll, Belgravia coverage — we come to you
Full-sheet drywall hanging and boarding in Allendale, Argyll, Belgravia

Choosing board room by room

Not one product

An McKernan house typically needs standard board through living areas, moisture-resistant in bathrooms and laundry, Type X in the garage assembly and any rated separation, and sometimes acoustic assemblies in bedrooms.

Ordered as a mix

Getting that right at ordering prevents the substitution that happens when the wrong board is what is on site and the schedule is tight.

Boarding new builds, basements and renos in McKernan

New construction and additions

In Allendale, Argyll, Belgravia we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Why McKernan homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in McKernan we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across McKernan and Scona, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

Our McKernan drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in McKernan is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Butt joints are the enemy

No taper to work with

Factory sheet edges are tapered so tape and compound sit below the surface. A butt joint — two cut ends meeting — has no taper, so the repair has to be built up and feathered wide.

How we reduce them

Longer sheets, planned layout, and running board the length of the wall rather than stacking short pieces. Every butt joint removed at hanging is a bulge the finisher does not have to disguise.

Our McKernan drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Allendale, Argyll, Belgravia is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

How it works

Simple, clean, on schedule — Drywall Boarding in Mckernan Edmonton

Free quote

We come out to your Mckernan Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Mckernan Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Mckernan Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Mckernan Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Mckernan Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Mckernan Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Mckernan Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding McKernan Edmonton

Drywall Boarding McKernan Edmonton: your questions answered

Does it matter how the board is stored on site?: Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.
Do you stand behind your boarding in McKernan?: Yes. We check the board is flat and fastened before we leave your McKernan job, and if something is not right we come back and make it right.
Can you board over my existing plaster?: Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
Do you board ceilings and walls?: Yes — we board ceilings first then walls, with staggered joints and tight fastening, so the finishing goes on flat.
Will you hang the board in McKernan and let our taper finish?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your McKernan home.
Should we use longer sheets?: On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding McKernan Edmonton

Drywall boarding in McKernan, hung for the finish