Why does it matter who hangs the board if someone else tapes it?

Because the finisher can only work with what they are given. Sheet layout, butt joints and whether edges land on framing are all decided at hanging, and good hanging costs the same in materials as bad hanging.

Will you hang the board in Matt Berry and let our taper finish?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Matt Berry home.

What is a butt joint and why avoid it?

Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Can you board over my existing plaster?

Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Should we use longer sheets?

On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Is boarding-only an option for Matt Berry builds?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Matt Berry home.

Drywall Boarding Matt Berry Edmonton | Board Hanging

Board hanging in Matt Berry that makes the taping easier

Good finishing starts with good boarding — sheets hung straight, square and tight, with joints staggered and the right board on every surface. In Balwin, Bannerman, Belmont we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Balwin, Bannerman, Belmont is an older Northeast community where settling cracks, aging texture and the occasional plaster repair come up, so boarding work here is steady. We cover Balwin, Bannerman, Belmont and Northeast, 7 days a week.

Tape-ready hand-off or full finish, your choice in Matt Berry
Full-sheet drywall hanging and boarding in Balwin, Bannerman, Belmont
We leave Matt Berry board tape-ready, or carry the finish ourselves
Ready-for-tape or fully finished — both offered in Matt Berry
Joints staggered, sheets hung tight and square
Matt Berry coverage — we come to you
Full-sheet drywall hanging and boarding in Matt Berry

What affects the cost of drywall boarding in Matt Berry in Edmonton?

Area, board spec and access

The cost of boarding in Matt Berry tracks the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and access — high ceilings and tight stairwells take more time. We price off the framing and a site look.

The right board in Matt Berry

We put the correct board on every surface — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations — so your Matt Berry project meets code before the tape goes on.

Matt Berry drywall in context

About Matt Berry

Matt Berry was named in honour of a Canadian aviation pioneer.

What we see in Matt Berry

In Matt Berry the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Butt joints are the enemy

No taper to work with

Factory sheet edges are tapered so tape and compound sit below the surface. A butt joint — two cut ends meeting — has no taper, so the repair has to be built up and feathered wide.

How we reduce them

Longer sheets, planned layout, and running board the length of the wall rather than stacking short pieces. Every butt joint removed at hanging is a bulge the finisher does not have to disguise.

Our Matt Berry drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Matt Berry is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Ceilings first, always

Order is structural

Ceiling board goes up before wall board so the wall sheets support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.

Also practical

Working overhead with a clear floor is faster and safer than working around stacked wall sheets, which matters on a whole-house Matt Berry job.

Boarding new builds, basements and renos in Matt Berry

New construction and additions

In Matt Berry we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Choosing board room by room

Not one product

An Matt Berry house typically needs standard board through living areas, moisture-resistant in bathrooms and laundry, Type X in the garage assembly and any rated separation, and sometimes acoustic assemblies in bedrooms.

Ordered as a mix

Getting that right at ordering prevents the substitution that happens when the wrong board is what is on site and the schedule is tight.

How it works

Simple, clean, on schedule — Drywall Boarding in Matt Berry Edmonton

Free quote

We come out to your Matt Berry Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Matt Berry Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Matt Berry Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Matt Berry Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Matt Berry Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Matt Berry Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Matt Berry Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Matt Berry Edmonton

Drywall Boarding Matt Berry Edmonton: your questions answered

Why does it matter who hangs the board if someone else tapes it?: Because the finisher can only work with what they are given. Sheet layout, butt joints and whether edges land on framing are all decided at hanging, and good hanging costs the same in materials as bad hanging.
Will you hang the board in Matt Berry and let our taper finish?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Matt Berry home.
What is a butt joint and why avoid it?: Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.
Can you board over my existing plaster?: Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
Should we use longer sheets?: On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.
Is boarding-only an option for Matt Berry builds?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Matt Berry home.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Matt Berry Edmonton

Board hanging in Matt Berry that makes the taping easier