Is boarding-only an option for Malmo Plains builds?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Malmo Plains home.

Can you board over my existing plaster?

Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Why does it matter who hangs the board if someone else tapes it?

Because the finisher can only work with what they are given. Sheet layout, butt joints and whether edges land on framing are all decided at hanging, and good hanging costs the same in materials as bad hanging.

What is a butt joint and why avoid it?

Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.

Should we use longer sheets?

On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Drywall Boarding Malmo Plains Edmonton | Board Hanging

Board hanging in Malmo Plains that makes the taping easier

Good finishing starts with good boarding — sheets hung straight, square and tight, with joints staggered and the right board on every surface. In Malmo Plains we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Malmo Plains is an older Scona community where settling cracks, aging texture and the occasional plaster repair come up, so boarding work here is steady. We cover Malmo Plains, Allendale, Argyll, Belgravia and Scona, 7 days a week.

Ceilings boarded first, then walls
New builds, additions, basements and renos
Ready-for-tape or fully finished — both offered in Malmo Plains
Tape-ready hand-off or full finish, your choice in Malmo Plains
We leave Malmo Plains board tape-ready, or carry the finish ourselves
Full-sheet drywall hanging and boarding in Allendale, Argyll, Belgravia
Full-sheet drywall hanging and boarding in Malmo Plains

Why hanging decides the finish

The finisher inherits the layout

Where the sheets land, how many butt joints there are and whether the edges hit framing all get decided at hanging. A finisher can only work with what they are given.

The cheapest quality decision

Good hanging costs the same in materials as bad hanging. On an Malmo Plains job it is the single highest-leverage stage, and the one clients never see.

Malmo Plains drywall in context

About Malmo Plains

Most of the land within the present neighbourhood was at one time part of the University of Alberta research farm.

What we see in Malmo Plains

In Malmo Plains the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Ceilings first, always

Order is structural

Ceiling board goes up before wall board so the wall sheets support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.

Also practical

Working overhead with a clear floor is faster and safer than working around stacked wall sheets, which matters on a whole-house Malmo Plains job.

Why Malmo Plains homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in Malmo Plains we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across Malmo Plains and Scona, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

Cutting around openings and boxes

Tight cuts, not filled gaps

A generous cut around an electrical box in an Malmo Plains wall gets filled with compound, which cracks and is also a hole in the air seal.

How it should be

Measured and cut to fit. It is slower and it produces a wall that both finishes better and performs better, which is why we do not let it slide as a small thing.

Our Malmo Plains drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Allendale, Argyll, Belgravia is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Boarding over existing walls in a renovation

Sometimes the right answer

Where Malmo Plains plaster is failing across a wall, boarding over it can be faster and flatter than rebuilding the plaster.

What to watch

It costs wall thickness at every opening — window reveals, door casings and outlets all need extending. We point out those knock-on costs before you choose it, because they are what makes the decision.

How it works

Simple, clean, on schedule — Drywall Boarding in Malmo Plains Edmonton

Free quote

We come out to your Malmo Plains Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Malmo Plains Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Malmo Plains Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Malmo Plains Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Malmo Plains Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Malmo Plains Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Malmo Plains Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Malmo Plains Edmonton

Drywall Boarding Malmo Plains Edmonton: your questions answered

Is boarding-only an option for Malmo Plains builds?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Malmo Plains home.
Can you board over my existing plaster?: Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
Why does it matter who hangs the board if someone else tapes it?: Because the finisher can only work with what they are given. Sheet layout, butt joints and whether edges land on framing are all decided at hanging, and good hanging costs the same in materials as bad hanging.
Do ceilings or walls go up first?: Ceilings, always. The wall sheets then support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.
What is a butt joint and why avoid it?: Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.
Should we use longer sheets?: On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Malmo Plains Edmonton

Board hanging in Malmo Plains that makes the taping easier