Free on-site quotes7 days a weekEdmonton · St. Albert · Sherwood Park · Spruce GroveLocally owned & operatedThe Go-To Drywall Contractor for Repair, Restoration & Finishing

Board hanging in Fulton Place that makes the taping easier

Straight, square and tight — with staggered joints and the proper board type per surface — is how Fulton Place hanging sets up a good finish. In Fulton Place we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Fulton Place is an Southeast community with a mix of older homes and newer builds, so boarding work here is steady. We cover Fulton Place, Avonmore, Bonnie Doon, Capilano and Southeast, 7 days a week.

Drywall Boarding Fulton Place Edmonton

Watch drywall boarding jobs in Fulton Place Edmonton on our YouTube channel

What affects the cost of drywall boarding in Fulton Place in Edmonton?

Area, board spec and access

The cost of boarding in Fulton Place tracks the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and access — high ceilings and tight stairwells take more time. We price off the framing and a site look.

The right board in Fulton Place

We put the correct board on every surface — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations — so your Fulton Place project meets code before the tape goes on.

Fulton Place drywall in context

About Fulton Place

Named for the creek which runs through the ravine on its west boundary, Fulton Place lies east of the downtown core and developed in the 1950s.

What we see in Fulton Place

In Fulton Place the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Our Fulton Place drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Fulton Place is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Sheet length and when to pay for 12-footers

Fewer joints, better wall

A 12-foot sheet across a long Fulton Place hallway removes joints that a 8-footers would create. It costs slightly more and handles harder.

Where it matters

Long walls, great rooms, and anywhere with raking light. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.

Boarding new builds, basements and renos in Fulton Place

New construction and additions

In Fulton Place we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Boarding new builds, basements and renos in Fulton Place

New construction and additions

In Avonmore, Bonnie Doon, Capilano we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Why Fulton Place homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in Fulton Place we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across Fulton Place and Southeast, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

Simple, clean, on schedule — Drywall Boarding in Fulton Place Edmonton

1

Free quote

We come out to your Fulton Place Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Fulton Place Edmonton starts with an honest, on-site assessment.

2

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Fulton Place Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

3

The work

We keep the dust under control and protect your Fulton Place Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

4

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Fulton Place Edmonton. If anything needs a second look, we handle it before we call the job done.

Rated by Edmonton Homeowners

Emplastrum Drywall is the drywall boarding contractor Fulton Place Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Fulton Place Edmonton.

Read our reviews on Google

Drywall Boarding Fulton Place Edmonton: your questions answered

Do you stand behind your boarding in Fulton Place?
Yes. We check the board is flat and fastened before we leave your Avonmore, Bonnie Doon, Capilano job, and if something is not right we come back and make it right.
Do you do drywall boarding in Fulton Place in Edmonton?
Yes — boarding in Avonmore, Bonnie Doon, Capilano is part of our regular work, and we book to your schedule. We also cover Avonmore, Bonnie Doon, Capilano and Southeast.
Can you board over my existing plaster?
Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
What is a butt joint and why avoid it?
Two cut sheet ends meeting, with no factory taper, so the joint has to be built up and feathered wide instead of sitting below the surface. Every one removed at hanging is a bulge the finisher does not have to disguise.
Should we use longer sheets?
On long walls, great rooms and anywhere with raking light, yes — they remove joints. In a small bedroom the difference is invisible and not worth the handling. We order per room rather than one size for the house.
Do ceilings or walls go up first?
Ceilings, always. The wall sheets then support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →
Get Your Free Drywall Quote
Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.
No obligation. We never share your information.
📞  Call (403) 829-8702 Free Quote
See our latest drywall projects & updates on FacebookFollow Emplastrum Drywall — Edmonton, St. Albert, Sherwood Park, Spruce Grove & Stony Plain Follow on Facebook