Does it matter how the board is stored on site?

Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

Do you do drywall boarding in Cromdale?

Yes — boarding in Cromdale is part of our regular work, and we book to your schedule. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.

Do you stand behind your boarding in Cromdale?

Yes. We check the board is flat and fastened before we leave your Cromdale job, and if something is not right we come back and make it right.

Do you board ceilings and walls?

Yes — we board ceilings first then walls, with staggered joints and tight fastening, so the finishing goes on flat.

Can you board over my existing plaster?

Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.

Will you hang the board in Cromdale and let our taper finish?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Cromdale home.

Drywall Boarding Cromdale Edmonton | Board Hanging

Drywall boarding in Cromdale, hung straight and square

On Cromdale jobs the finish is only as good as the hang: straight, square, tight sheets, staggered joints, correct board per surface. In Cromdale we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Cromdale is an established south Edmonton community of 1960s-70s homes where ceiling stipple, settling cracks and dated texture are common, so boarding work here is steady. We cover Cromdale, Abbottsfield, Alberta Avenue, Beacon Heights and North Central, 7 days a week.

Joints staggered, sheets hung tight and square
Ready-for-tape or fully finished — both offered in Cromdale
We leave Cromdale board tape-ready, or carry the finish ourselves
Full-sheet drywall hanging and boarding in Cromdale
Ready for tape, or we finish it too
Abbottsfield, Alberta Avenue, Beacon Heights coverage — we come to you
Tape-ready hand-off or full finish, your choice in Cromdale

Butt joints are the enemy

No taper to work with

Factory sheet edges are tapered so tape and compound sit below the surface. A butt joint — two cut ends meeting — has no taper, so the repair has to be built up and feathered wide.

How we reduce them

Longer sheets, planned layout, and running board the length of the wall rather than stacking short pieces. Every butt joint removed at hanging is a bulge the finisher does not have to disguise.

Cromdale drywall in context

About Cromdale

One of Edmonton's older inner-city neighbourhoods, Cromdale lies just to the northeast of the City centre.

What we see in Cromdale

In Cromdale the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Why Cromdale homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in Cromdale we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across Cromdale and North Central, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

Common drywall boarding situations in Cromdale in Edmonton

In Cromdale, cromdale sits in Edmonton's North Central district. One of Edmonton's older inner-city neighbourhoods, Cromdale lies just to the northeast of the City centre. Across roughly 1,060 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Cromdale and the surrounding North Central district, 7 days a week. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

Our Cromdale drywall boarding process in Edmonton, step by step

Ceilings first, then walls

Boarding in Cromdale is done in the right order — ceilings first so the wall sheets support the ceiling edges — with sheets hung tight to the framing and joints staggered so they do not line up and crack.

Square, tight and tape-ready

We cut clean around boxes and openings, keep gaps minimal for the taper, and check the board is flat and fastened properly before we leave. Good boarding makes the finishing faster and the final wall flatter.

Boarding over existing walls in a renovation

Sometimes the right answer

Where Cromdale plaster is failing across a wall, boarding over it can be faster and flatter than rebuilding the plaster.

What to watch

It costs wall thickness at every opening — window reveals, door casings and outlets all need extending. We point out those knock-on costs before you choose it, because they are what makes the decision.

What affects the cost of drywall boarding in Cromdale in Edmonton?

Area, board spec and access

The cost of boarding in Cromdale tracks the square footage, the board spec (fire-rated, moisture-resistant and soundproof board cost more than standard), and access — high ceilings and tight stairwells take more time. We price off the framing and a site look.

The right board in Cromdale

We put the correct board on every surface — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations — so your Cromdale project meets code before the tape goes on.

How it works

Simple, clean, on schedule — Drywall Boarding in Cromdale Edmonton

Free quote

We come out to your Cromdale Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Cromdale Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Cromdale Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Cromdale Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Cromdale Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Cromdale Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Cromdale Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Cromdale Edmonton

Drywall Boarding Cromdale Edmonton: your questions answered

Does it matter how the board is stored on site?: Yes. It damages at the edges, absorbs moisture from a damp slab and bows if stacked badly. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.
Do you do drywall boarding in Cromdale in Edmonton?: Yes — boarding in Cromdale is part of our regular work, and we book to your schedule. We also cover Abbottsfield, Alberta Avenue, Beacon Heights and North Central.
Do you stand behind your boarding in Cromdale?: Yes. We check the board is flat and fastened before we leave your Cromdale job, and if something is not right we come back and make it right.
Do you board ceilings and walls?: Yes — we board ceilings first then walls, with staggered joints and tight fastening, so the finishing goes on flat.
Can you board over my existing plaster?: Often yes, and where plaster is failing across a whole wall it can be faster and flatter than rebuilding it. It costs wall thickness at every opening though — reveals, casings and outlets all need extending, and that is usually what decides it.
Will you hang the board in Cromdale and let our taper finish?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Cromdale home.

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Cromdale Edmonton

Drywall boarding in Cromdale, hung straight and square