Do ceilings or walls go up first?

Ceilings, always. The wall sheets then support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.

Do you stand behind your boarding in Allard?

Yes. We check the board is flat and fastened before we leave your Ambleside, Blackburne, Blackmud Creek job, and if something is not right we come back and make it right.

Is boarding-only an option for Allard builds?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Allard home.

Do you use the right board for code in Allard?

Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Ambleside, Blackburne, Blackmud Creek project meets code.

Do you board ceilings and walls?

Yes — we board ceilings first then walls, with staggered joints and tight fastening, so the finishing goes on flat.

Will you hang the board in Allard and let our taper finish?

Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Allard home.

Drywall Boarding Allard Edmonton | Board Hanging

Drywall boarding in Allard, hung for the finish

Every Allard finish rests on the boarding: sheets tight and square, joints staggered, and the right board in the right place. In Allard we board new builds, additions, basements and renos as a standalone stage, ready for your taper or for us to finish. Allard is an older Southwest community where settling cracks, aging texture and the occasional plaster repair come up, so boarding work here is steady. We cover Allard, Ambleside, Blackburne, Blackmud Creek and Southwest, 7 days a week.

Full-sheet drywall hanging and boarding in Allard
Ambleside, Blackburne, Blackmud Creek coverage — we come to you
Fire-rated, moisture-resistant and soundproof board to spec
Allard coverage — we come to you
Ceilings boarded first, then walls
Ready-for-tape or fully finished — both offered in Allard
Ready for tape, or we finish it too

Handling and storing board on site

It is fragile until it is up

Drywall damages at the edges, absorbs moisture from a damp Allard slab and bows if stacked badly.

What we do

Stored flat and off the floor, kept dry, and not delivered weeks before it is needed. Damaged edges become damaged joints, and a sheet that has taken moisture never finishes properly.

Why hanging decides the finish

The finisher inherits the layout

Where the sheets land, how many butt joints there are and whether the edges hit framing all get decided at hanging. A finisher can only work with what they are given.

The cheapest quality decision

Good hanging costs the same in materials as bad hanging. On an Allard job it is the single highest-leverage stage, and the one clients never see.

Cutting around openings and boxes

Tight cuts, not filled gaps

A generous cut around an electrical box in an Allard wall gets filled with compound, which cracks and is also a hole in the air seal.

How it should be

Measured and cut to fit. It is slower and it produces a wall that both finishes better and performs better, which is why we do not let it slide as a small thing.

Boarding new builds, basements and renos in Allard

New construction and additions

In Ambleside, Blackburne, Blackmud Creek we board complete new builds and additions, coordinating with the trades so the project keeps moving.

Basements and renovations

Basement development and reno boarding are common here. We board the new layout square and to spec, ready for tape. See our basement drywall and new construction pages.

Boarding to suit the trades that follow

Leave them what they need

Access panels, bath surrounds, cabinet backing and shower niches all affect where board goes and where it stops.

Asking first

We would rather know the Allard tiler needs a particular substrate behind the shower, or the plumber needs an access panel, before boarding than cut into a finished wall for it afterwards.

Why Allard homeowners and builders trust Emplastrum

Boarding that makes finishing easy

As a mudding and taping specialist, we board the way we want to receive it — straight, square and tight — because in Allard we know good boarding is what makes a flat finish possible.

Fixed price, on schedule

We board across Allard and Southwest, 7 days a week. Free on-site quotes and fixed prices — you know the number before we start, we keep the site clean, and we stand behind the work. If something is not right, we come back and make it right.

How it works

Simple, clean, on schedule — Drywall Boarding in Allard Edmonton

Free quote

We come out to your Allard Edmonton property, take a real look at the drywall boarding, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every drywall boarding quote in Allard Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the drywall boarding in Allard Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Allard Edmonton home while we finish the drywall boarding to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished drywall boarding with us and you're happy with the result in Allard Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the drywall boarding contractor Allard Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your drywall boarding project in Allard Edmonton.

Read our reviews on Google

FAQ — Drywall Boarding Allard Edmonton

Drywall Boarding Allard Edmonton: your questions answered

Do ceilings or walls go up first?: Ceilings, always. The wall sheets then support the ceiling perimeter. Reversed, the ceiling edge is unsupported and cracks along the wall junction.
Do you stand behind your boarding in Allard?: Yes. We check the board is flat and fastened before we leave your Ambleside, Blackburne, Blackmud Creek job, and if something is not right we come back and make it right.
Is boarding-only an option for Allard builds?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Allard home.
Do you use the right board for code in Allard?: Yes — moisture-resistant on exterior basement walls and wet areas, fire-rated on garage and suite separations, so your Ambleside, Blackburne, Blackmud Creek project meets code.
Do you board ceilings and walls?: Yes — we board ceilings first then walls, with staggered joints and tight fastening, so the finishing goes on flat.
Will you hang the board in Allard and let our taper finish?: Yes — we hang straight and square as a standalone stage, ready for your taper, or we can board and finish it as one job in your Allard home.

Need Edmonton’s go-to drywall contractor for repair, restoration and finishing? One trusted team for boarding, taping, finishing, repairs & renovations — start to finish.

Your Drywall Contractor in Edmonton →

Get Your Free Drywall Quote

Tell us about your project — we’ll get right back to you, 7 days a week. Prefer to call? (403) 829-8702.

Full Name / Company

Phone Number

Email Address

Area

Service Needed

I agree to be contacted by Emplastrum Drywall about my project by phone, text, or email.

No obligation. We never share your information.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Drywall Boarding Allard Edmonton

Drywall boarding in Allard, hung for the finish