What type of drywall do you use for exterior basement walls in Edmonton?

Moisture-resistant (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. For Windermere interior partitions clear of moisture, standard 1/2” drywall is the right product. For legal suites, 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify before we start.

Do you do legal suite basement drywall in Edmonton?

Yes, and we know the spec. Edmonton legal suites require 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls between the suite and the main living space. That spec is how we board Windermere suites — and how they pass inspection.

Do you take Windermere basement finishing to Level 5?

Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Windermere project needs.

What board do you use on exterior basement walls in Windermere?

In Windermere basements, foundation-adjacent walls and plumbing or laundry areas take moisture-resistant board (green or purple). Standard 1/2” sheets handle the dry interior partitions in Windermere basements. In Windermere legal suites we board the ceiling Type X fire-rated and the party walls soundproof. Each Windermere surface has its product chosen at quote time, before the job begins.

How long does basement drywall take in an Windermere home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Windermere are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

Can you board a basement that was partially started?

All the time. We assess what is already there — whether the board choice is correct for each surface, whether the framing is square enough to board, whether any board needs to come down — and give you a straight price to finish it properly. Boarding over issues is not how we work in Windermere.

Basement Drywall Windermere Edmonton | Basement Dev

Basement drywall boarded, taped and finished right the first time

We finish basements in Windermere homes — boarding the framing, specifying the right board type for each surface, taping and mudding every joint and corner to Level 4, and leaving the space paint-ready. Windermere is one of Southwest’s newest communities — most homes are less than ten years old with framed, unfinished basements that homeowners are now ready to develop. We cover Windermere, East Hills, Applewood and Edmonton and the surrounding area, 7 days a week.

Moisture-resistant board on exterior foundation walls
Sound board isolating the Windermere suite from the main floor
Fire-rated and soundproof board for legal suites
The Windermere suite boundary gets soundproof board
Basement boarding and taping — Level 4 finish as standard
Moisture-resistant board on Windermere exterior walls and around plumbing
Bulkheads, soffits, mechanical chases and custom ceiling work

Our Edmonton basement drywall process in Edmonton, step by step

Board selection before we start — right product for every surface

Basement drywall in Edmonton is not one-product-fits-all. Exterior foundation walls need moisture-resistant board. Any wall touching a bathroom or laundry needs moisture-resistant. If there is a legal suite below or above, the ceiling and party walls need fire-rated. STC-rated soundproof board between the suite and the main living area reduces noise transmission significantly. We specify the right product for each surface before we pull the first sheet — not after the inspector flags it.

Boarding, taping and mudding in Edmonton basements

Once the right board is on the right surfaces, every seam, inside corner, outside corner and fastener head gets taped and mudded to Level 4 — three coats, proper drying time between each, sanded flat. Basement ceilings in Edmonton homes often have bulkheads for HVAC, beams and posts that need framing around them. We tape all of that to the same standard as the walls. When we leave, the basement looks the same quality from floor to ceiling.

Our Windermere basement drywall process in Edmonton, step by step

Board to spec

In Allard, Ambleside, Blackburne we board ceiling first, then walls, with moisture-resistant board on every exterior foundation wall and fire-rated or soundproof board where a suite is involved.

The finish stage

In Allard, Ambleside, Blackburne we tape, build mud coats with real drying time, sand flat to Level 4 or 5 and verify under light before handing off for paint.

Common basement drywall situations in Windermere in Edmonton

In Windermere, windermere sits in Edmonton's Southwest district. Windermere likely comes from the words "winder", which means "to take one's breath away", and "mere", which refers to the boundary of an area or a significant landmark. Across roughly 3,105 homes here, the drywall work is first-year settling, basement dev for first owners, Level 5 over builder-grade. We cover Windermere and the surrounding Southwest district, 7 days a week. Same trusted team, same process on every job — on-site quote, fixed price, no surprises.

What affects the cost of basement drywall in Windermere in Edmonton?

Size, board spec and finish level

The cost in Windermere depends on the square footage, the board spec (moisture-resistant on exterior walls, fire-rated and soundproof if there is a suite), and the finish level. We price off the layout and a site look.

Basement development in Windermere

Basement development is a steady call here, and we put the right board where the plan and code require it.

What affects the cost of basement drywall in Edmonton in Edmonton?

Linear footage, board type and ceiling complexity in Edmonton basements

The cost of basement drywall in Edmonton comes down to five things: total linear footage of framed wall, ceiling square footage and height, the number of bulkheads, soffits and chases, board type (standard, moisture-resistant or soundproof cost differently), and how much mechanical, plumbing and structural work the walls have to work around. A simple open basement in a 2010s Southwest new build is different from a basement in a 1970s Allard, Ambleside, Blackburne bungalow with low ceilings and exposed beams. On-site measurement in Windermere first; the fixed price follows before we lift a sheet.

Legal suite requirements and Edmonton basement drywall specs

A legal secondary suite in Edmonton has specific drywall requirements — 5/8” Type X fire-rated board on the ceiling between the suite and the floor above, and STC-rated soundproof board on suite walls. Moisture-resistant board is required in bathrooms, laundry and any wall with exterior exposure. We know the Edmonton spec and we board to it — you will not need to call us back to add board before an inspection.

How it works

Simple, clean, on schedule — Basement Drywall in Windermere Edmonton

Free quote

We come out to your Windermere Edmonton property, take a real look at the basement drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every basement drywall quote in Windermere Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the basement drywall in Windermere Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Windermere Edmonton home while we finish the basement drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished basement drywall with us and you're happy with the result in Windermere Edmonton. If anything needs a second look, we handle it before we call the job done.

FAQ — Basement Drywall Windermere Edmonton

Basement Drywall Windermere Edmonton: your questions answered

What type of drywall do you use for exterior basement walls in Edmonton?: Moisture-resistant (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. For Windermere interior partitions clear of moisture, standard 1/2” drywall is the right product. For legal suites, 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify before we start.
Do you do legal suite basement drywall in Edmonton in Edmonton?: Yes, and we know the spec. Edmonton legal suites require 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls between the suite and the main living space. That spec is how we board Windermere suites — and how they pass inspection.
Do you take Windermere basement finishing to Level 5?: Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Windermere project needs.
What board do you use on exterior basement walls in Windermere?: In Windermere basements, foundation-adjacent walls and plumbing or laundry areas take moisture-resistant board (green or purple). Standard 1/2” sheets handle the dry interior partitions in Windermere basements. In Windermere legal suites we board the ceiling Type X fire-rated and the party walls soundproof. Each Windermere surface has its product chosen at quote time, before the job begins.
How long does basement drywall take in an Windermere home in Edmonton?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Windermere are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
Can you board a basement that was partially started?: All the time. We assess what is already there — whether the board choice is correct for each surface, whether the framing is square enough to board, whether any board needs to come down — and give you a straight price to finish it properly. Boarding over issues is not how we work in Windermere.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Basement Drywall Windermere Edmonton

Basement drywall boarded, taped and finished right the first time