Can you board a legal suite basement?

Yes — the fire-rated ceiling and soundproof party walls go in to the City of Edmonton suite spec, alongside the rest of your Strathcona basement.

Do you cover all of Edmonton for basement drywall?

Yes — we cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.

Do you do legal suite basement drywall in Edmonton?

Yes, and we know the spec. Edmonton legal suites require 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls between the suite and the main living space. That spec is how we board Strathcona suites — and how they pass inspection.

Is Level 5 available for Strathcona basement walls?

Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Strathcona project needs.

Do you do legal suite basement drywall in Strathcona?

Yes, and we know the spec. A legal secondary suite in Strathcona requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls. Moisture-resistant in wet areas. Boarding to spec is why Strathcona suites we finish clear inspection.

Do you stand behind your basement drywall in Strathcona?

Yes. We walk the finished Strathcona basement with you, and if something is not right we come back and make it right.

Basement Drywall Strathcona Edmonton | Basement Dev

Basement drywall and finishing in Strathcona, done to spec

Strathcona is an Scona community, where basement development is a steady source of boarding, taping and finishing work We board, tape, mud and finish basements to a Level 4 or 5 finish. We cover Strathcona and every all of Edmonton community, 7 days a week.

Full basement development boarding and finishing in Strathcona
Moisture board against the Strathcona foundation and near plumbing
Allendale, Argyll, Belgravia coverage — we come to you
Strathcona coverage — we come to you
The Strathcona suite boundary gets soundproof board
Basement boarding and taping in Strathcona — Level 4 as standard
Bulkheads, soffits, mechanical chases and custom ceiling work

Why Strathcona homeowners trust Emplastrum for basement drywall in Edmonton

Spec done right

Basement drywall has to meet code as much as look good, and in Strathcona we put the right board on every surface, whether it is a straight development or a legal suite.

Fixed price, on schedule

We do basement drywall across Strathcona and Scona, 7 days a week. Free on-site Strathcona quotes and fixed prices, and we stand behind the work. If anything is off on an Strathcona basement, we return and put it right.

Strathcona drywall in context

About Strathcona

Strathcona was named for Lord Strathcona, Hudson Bay Company Governor (1889-1914) and the man chosen to drive the "last spike" of the CPR transcontinental railway.

What we see in Strathcona

In Strathcona the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We confirm what your home actually needs on site, in writing, before anything starts.

Basement drywall work we do across Edmonton in Edmonton

New basement developments in Edmonton’s newer communities

The most common basement drywall job in Scona — Allendale, Argyll, Belgravia — is the new development: framing was included at possession, the homeowner wants to finish the space, and they want it done properly to Level 4. We board, tape and finish these Edmonton basements start to finish, with the right board spec on every surface, and leave them ready for flooring and paint.

Basement conversions and suite additions in established Edmonton neighbourhoods

In established Scona — Allendale, Argyll, Belgravia — the most common basement drywall call is a conversion or suite addition. The basement has old drywall or no drywall, low ceilings, exposed mechanical and an awkward layout. We have done enough of these to know how to frame around the obstacles, spec the right board and leave a basement that looks intentional rather than improvised.

Basement drywall board types used in Strathcona homes in Edmonton

Standard drywall — interior basement walls in Strathcona

Standard 1/2” drywall is correct for interior partition walls inside an Strathcona basement that have no moisture exposure — the walls separating a home office from a bedroom, partition walls in a recreation room or home theatre. In Strathcona basements it saves handling effort while finishing exactly like the main floors. Most interior basement partition walls in Strathcona homes use standard board.

Moisture-resistant, soundproof and fire-rated — where the spec matters in Strathcona

Exterior foundation walls in Strathcona homes need moisture-resistant board even with a vapour barrier. For bathrooms and laundry in Strathcona, moisture-resistant board goes on every wall. Code puts 5/8” Type X fire-rated board on every Strathcona suite ceiling. The Strathcona suite-to-main party wall is where STC soundproof board earns its cost — you can hear the difference. The Strathcona quote includes a surface-by-surface map with the correct product specified up front.

Common basement drywall situations in Strathcona in Edmonton

In Strathcona, strathcona sits in Edmonton's Scona district. Strathcona was named for Lord Strathcona, Hudson Bay Company Governor (1889-1914) and the man chosen to drive the "last spike" of the CPR transcontinental railway. Across roughly 5,005 homes here, the drywall work is plaster and lath repair, popcorn and stipple ceiling removal, careful patching into original surfaces. We cover Strathcona and the surrounding Scona district, 7 days a week. We handle all of it the same careful way — on-site quote, fixed price, done right.

Legal suites and basement development in Strathcona

Straight development

Most basement calls in Allendale, Argyll, Belgravia are straightforward development — rec room, bedrooms, bathroom — boarded and finished to a clean Level 4.

Legal suite conversions

If your Allendale, Argyll, Belgravia basement is turning into a legal suite, the City of Edmonton spec calls for a fire-rated ceiling and soundproof party walls — we install both. See Legal Suite Drywall Edmonton.

What affects the cost of basement drywall in Strathcona in Edmonton?

Size, board spec and finish level

The cost in Allendale, Argyll, Belgravia depends on the square footage, the board spec (moisture-resistant on exterior walls, fire-rated and soundproof if there is a suite), and the finish level. We price off the layout and a site look.

Basement development in Allendale, Argyll, Belgravia

Basement development is a steady call here, and we put the right board where the plan and code require it.

How it works

Simple, clean, on schedule — Basement Drywall in Strathcona Edmonton

Free quote

We come out to your Strathcona Edmonton property, take a real look at the basement drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every basement drywall quote in Strathcona Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the basement drywall in Strathcona Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Strathcona Edmonton home while we finish the basement drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished basement drywall with us and you're happy with the result in Strathcona Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the basement drywall contractor Strathcona Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your basement drywall project in Strathcona Edmonton.

Read our reviews on Google

FAQ — Basement Drywall Strathcona Edmonton

Basement Drywall Strathcona Edmonton: your questions answered

Can you board a legal suite basement?: Yes — the fire-rated ceiling and soundproof party walls go in to the City of Edmonton suite spec, alongside the rest of your Strathcona basement.
Do you cover all of Edmonton for basement drywall in Edmonton?: Yes — we cover all four Edmonton quadrants, Edmonton, Allendale, Argyll, Belgravia, Edmonton and surrounding communities, 7 days a week. The only exception is downtown high-rise towers, which require working-at-heights permits and building-management access we do not carry.
Do you do legal suite basement drywall in Edmonton in Edmonton?: Yes, and we know the spec. Edmonton legal suites require 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls between the suite and the main living space. That spec is how we board Strathcona suites — and how they pass inspection.
Is Level 5 available for Strathcona basement walls?: Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Strathcona project needs.
Do you do legal suite basement drywall in Strathcona in Edmonton?: Yes, and we know the spec. A legal secondary suite in Strathcona requires 5/8” Type X fire-rated board on the ceiling separating the suite from the floor above, and STC-rated soundproof board on the party walls. Moisture-resistant in wet areas. Boarding to spec is why Strathcona suites we finish clear inspection.
Do you stand behind your basement drywall in Strathcona in Edmonton?: Yes. We walk the finished Strathcona basement with you, and if something is not right we come back and make it right.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Basement Drywall Strathcona Edmonton

Basement drywall and finishing in Strathcona, done to spec