Do you take Kirkness basement finishing to Level 5?

Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Kirkness project needs.

Can you board a basement that was partially started?

All the time. We assess what is already there — whether the board choice is correct for each surface, whether the framing is square enough to board, whether any board needs to come down — and give you a straight price to finish it properly. Boarding over issues is not how we work in Kirkness.

How long does basement drywall take in an Kirkness home?

Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Kirkness are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.

What type of drywall do you use for exterior basement walls in Edmonton?

Moisture-resistant (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. For Kirkness interior partitions clear of moisture, standard 1/2” drywall is the right product. For legal suites, 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify before we start.

Do you finish Kirkness basements to Level 5?

Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Kirkness project needs.

Do you use moisture-resistant board on Kirkness basement walls?

Yes — on every exterior foundation wall, even with a vapour barrier, in your Kirkness basement.

Basement Drywall Kirkness Edmonton | Basement Dev

Basement drywall and finishing in Kirkness, done to spec

We finish basements in Kirkness homes — boarding the framing, specifying the right board type for each surface, taping and mudding every joint and corner to Level 4, and leaving the space paint-ready. Kirkness is one of Northeast’s newest communities — most homes are less than ten years old with framed, unfinished basements that homeowners are now ready to develop. We cover Kirkness, East Hills, Applewood and Edmonton and the surrounding area, 7 days a week.

Bulkheads, soffits and mechanical room boarding
Coordinated with your other trades
Sanded flat and paint-ready before we leave
The Kirkness suite boundary gets soundproof board
Bulkheads, soffits, mechanical chases and ceiling work
Moisture-resistant board on Kirkness exterior walls and around plumbing
Kirkness foundation walls and plumbing runs get moisture-resistant board

About Basement Drywall in Kirkness in Edmonton

Basement Drywall in Kirkness — what to expect

We provide basement drywall services in Kirkness and surrounding communities, 7 days a week. Kirkness is one of Northeast’s oldest communities, with homes from the 1960s and 1970s. Renovation drywall, stipple and popcorn ceiling removal and crack repair are among the most common drywall calls from this established Northeast area.

Fixed price — assessed on site in Kirkness

We assess the job on site, confirm the scope and give you a fixed price before we start. The number does not change after we begin unless the scope changes and we agree on it first.

Kirkness drywall in context

About Kirkness

Located in the Clareview district, this area is named for James Kirkness, a Hudson's Bay Company employee who came here from Scotland in 1866.

What we see in Kirkness

In Kirkness the drywall work is popcorn and stipple ceiling removal, settling+truss-uplift cracks, nail pops, Poly-B repipe patching repipe patching. We confirm what your home actually needs on site, in writing, before anything starts.

Basement drywall work we do across Edmonton in Edmonton

New basement developments in Edmonton’s newer communities

The most common basement drywall job in Northeast — Balwin, Bannerman, Belmont — is the new development: framing was included at possession, the homeowner wants to finish the space, and they want it done properly to Level 4. We board, tape and finish these Edmonton basements start to finish, with the right board spec on every surface, and leave them ready for flooring and paint.

Basement conversions and suite additions in established Edmonton neighbourhoods

In established Northeast — Balwin, Bannerman, Belmont — the most common basement drywall call is a conversion or suite addition. The basement has old drywall or no drywall, low ceilings, exposed mechanical and an awkward layout. We have done enough of these to know how to frame around the obstacles, spec the right board and leave a basement that looks intentional rather than improvised.

Our Basement Drywall process in Kirkness in Edmonton

Assess before we start — always in Kirkness

Every job in Kirkness starts with an on-site assessment. We do not guess at scope, board type or texture match. We confirm what is needed, give you a fixed price and only then start the work.

Left clean and paint-ready in Kirkness

When we leave your Kirkness home, the work is done properly — Level 4 tape on every joint, texture matched, surface sanded flat and ready for the painter. No rework from the painter. No callbacks.

Types of Basement Drywall work in Kirkness in Edmonton

New installs, renovation work and repair in Kirkness

We handle the full range of basement drywall work in Kirkness — from brand-new basement boarding and taping to single-room renovation patches and targeted repair work. Every job gets the same Level 4 standard and fixed price commitment.

Legal suites and multi-use spaces in Kirkness

Legal suite work in Kirkness requires specific board specs: fire-rated on the suite ceiling, soundproof on party walls, moisture-resistant in wet areas. We confirm the spec before we start and board to it.

Our Kirkness basement drywall process in Edmonton, step by step

Board to spec

In Kirkness we board ceiling first, then walls, with moisture-resistant board on every exterior foundation wall and fire-rated or soundproof board where a suite is involved.

Tape, mud and finish

We tape the Kirkness basement, apply mud coats with full drying time, then sand to a flat Level 4 or 5, checking under light before the paint hand-off.

What affects the cost of basement drywall in Edmonton in Edmonton?

Linear footage, board type and ceiling complexity in Edmonton basements

The cost of basement drywall in Edmonton comes down to five things: total linear footage of framed wall, ceiling square footage and height, the number of bulkheads, soffits and chases, board type (standard, moisture-resistant or soundproof cost differently), and how much mechanical, plumbing and structural work the walls have to work around. A simple open basement in a 2010s Northeast new build is different from a basement in a 1970s Balwin, Bannerman, Belmont bungalow with low ceilings and exposed beams. On-site measurement in Kirkness first; the fixed price follows before we lift a sheet.

Legal suite requirements and Edmonton basement drywall specs

A legal secondary suite in Edmonton has specific drywall requirements — 5/8” Type X fire-rated board on the ceiling between the suite and the floor above, and STC-rated soundproof board on suite walls. Moisture-resistant board is required in bathrooms, laundry and any wall with exterior exposure. We know the Edmonton spec and we board to it — you will not need to call us back to add board before an inspection.

How it works

Simple, clean, on schedule — Basement Drywall in Kirkness Edmonton

Free quote

We come out to your Kirkness Edmonton property, take a real look at the basement drywall, and hand you a fixed price on the spot — no guessing, no vague ballpark. Every basement drywall quote in Kirkness Edmonton starts with an honest, on-site assessment.

Book a day

We pick a day that works for your schedule and show up on time, ready to start the basement drywall in Kirkness Edmonton. No back-and-forth rescheduling — once it's booked, our team is there.

The work

We keep the dust under control and protect your Kirkness Edmonton home while we finish the basement drywall to a clean, paint-ready standard. Floors covered, doors sealed off, and the site left tidy at the end of every day.

Walk it with you

We don't pack up till you've walked the finished basement drywall with us and you're happy with the result in Kirkness Edmonton. If anything needs a second look, we handle it before we call the job done.

Reviews

Rated by Edmonton Homeowners

★ ★ ★ ★ ★

Emplastrum Drywall is the basement drywall contractor Kirkness Edmonton trusts for repair, restoration and finishing — rated on Google by Edmonton homeowners.

Read the reviews, or leave your own after your basement drywall project in Kirkness Edmonton.

Read our reviews on Google

FAQ — Basement Drywall Kirkness Edmonton

Basement Drywall Kirkness Edmonton: your questions answered

Do you take Kirkness basement finishing to Level 5?: Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Kirkness project needs.
Can you board a basement that was partially started?: All the time. We assess what is already there — whether the board choice is correct for each surface, whether the framing is square enough to board, whether any board needs to come down — and give you a straight price to finish it properly. Boarding over issues is not how we work in Kirkness.
How long does basement drywall take in an Kirkness home in Edmonton?: Timeline depends on scope. We give you a specific timeline at the on-site quote. Most single-room or single-area jobs in Kirkness are complete in one to two days. Larger basement or whole-home jobs take longer and are scoped precisely before we start.
What type of drywall do you use for exterior basement walls in Edmonton?: Moisture-resistant (green board or purple board) on all walls against the exterior foundation and around plumbing and laundry. For Kirkness interior partitions clear of moisture, standard 1/2” drywall is the right product. For legal suites, 5/8” Type X fire-rated on the ceiling and soundproof board on party walls. We specify before we start.
Do you finish Kirkness basements to Level 5?: Where the paint spec calls for it, yes — most basements finish well at Level 4, and we tell you honestly which your Kirkness project needs.
Do you use moisture-resistant board on Kirkness basement walls?: Yes — on every exterior foundation wall, even with a vapour barrier, in your Kirkness basement.

📐 Plan Your Project

Estimate Your Drywall Materials

📐 Materials Calculator

How much do you need?

Enter your room size for a quick materials estimate.

Room length (ft)Room width (ft)Ceiling height (ft)Number of rooms Include ceilingSheet sizeCoats of paintCavity depthFraming spacingInsulation already there (in)Top up to (in)Stud spacingDoorsWindowsWaste allowance (%)

Estimate only — rounded up, based on standard coverage rates (drywall +10% waste; paint ~350 sq ft per gallon per coat; batt bundles by cavity depth, less a framing factor; studs at your chosen spacing plus waste). Product coverage varies by brand — confirm quantities before buying. Ask us about the right R-value for your project.

Rather we handle it? Get a free estimate →

Basement Drywall Kirkness Edmonton

Basement drywall and finishing in Kirkness, done to spec